5000L Jacketed Conical Wine Tank with Temperature Control for Red Grape
A 5000L stainless conical fermenter built for red grape maceration, with a dimple glycol jacket on the cone and lower sidewall to hold ferment temperature. SUS304 or 316L shell, TIG welds polished to Ra 0.8µm and passivated, CIP spray ball, racking arm, thermowell and manway. Configured to your crush size, cone angle and cellar layout.
5000L Jacketed Multi-Chamber Wine Fermentor Tank for Winery Storage
A 5,000 L jacketed multi-chamber wine tank lets one shell handle several lots or press fractions on a single footprint and chiller loop. Built in 304 or 316L with individually controlled jacket zones, passivated wetted surfaces, and per-chamber CIP, racking, and sampling ports for winery fermentation and storage.
5000L Jacketed Wine Fermentation Tank with Cooling for Brewery & Winery
Built for wineries running 5,000 L ferments, this jacketed tank pairs AISI 304 or 316L construction with laser-welded cooling jackets, TIG-welded product-contact seams and an optional 60° cone bottom. Dimpled jackets, a CIP spray ball, tri-clamp or DIN fittings and separately rated inner and jacket pressures give cellar teams control over fermentation temperature, lees dropping and yeast recovery.
5000L Open Top Red Wine Fermentation Tank Dimple Plate Cooling Jacket
A 5000 L open top red wine fermenter with a two-zone dimple plate cooling jacket and an oil brushed exterior. We cover shell thickness, weld and finish details, cooling surface sizing, port layout, and how to specify the tank for punch-down red programs. Includes a specification table and answers on insulation, glycol temperatures, and 304 versus 316L.
5000L Pressurized Food-Grade Fermentation Tank for Sparkling Wine Production
A 5,000 L food-grade pressurized tank built for sparkling wine production, fabricated from 304 or 316L stainless with a dimple cooling jacket on the cone and lower cylinder. Design pressure, relief valve setting, interior polish and fitting layout are specified per site. Suited to secondary fermentation and cold stabilization in commercial cellars.
5000L Pressurized Sparkling Wine Fermentation Tank with Cooling Jacket
A 5,000 L stainless steel tank for sparkling wine fermentation, carbonation, and cold storage. Built with dimple cooling jackets, a dished top, and a 60° cone for full yeast and solids discharge. Working pressure is configured to your process, with relief valve, sample valve, racking arm, and CIP spray ball fitted as standard. Available in SUS304 or 316L with Ra ≤ 0.8 µm interior finish.
5000L Red Wine Fermentation Tank, Floating Lid & Dimple Cooling Jacket
5000L red wine fermentation tank with floating lid and dimple cooling jacket. Built in SUS304 or 316L, it handles fermentation, maceration, and anti-corrosion storage in one vessel. The floating lid reduces headspace and oxygen pickup, while the dimple jacket controls must temperature. Available with CIP, racking arm, pressure/vacuum relief, and custom fittings for winery layouts.
5000L Stainless Steel Dimple Plate Cooling Wine Fermentation Tank
Built for commercial cellars, this 5000 L wine fermentation tank uses a dimple-plate cooling jacket welded directly to the shell for even heat transfer during red and white fermentations. Available in 304 or 316L stainless steel with zoned jackets, CIP spray ball, insulation, and conical or dished bottom.
5000L Stainless Steel Floating Lid Wine Tank | Variable Capacity Fermenter
Built for cellars that need flexible capacity, this 5,000 L floating lid tank stores full lots or partial volumes under an inflatable EPDM gasket that seals against the shell. 304 stainless construction, 2.0 mm shell, dished bottom, 400 mm manway, optional cooling jacket and CIP spray ball. Tell us your lot sizes and cellar temperature for a configured quote.
5000L to 10000L Vertical Stainless Steel Edible Oil Water Wine Storage Tank
Vertical stainless steel storage tanks in 5,000 and 10,000 liter sizes for edible oil, process water, wine and spirits. Built in SUS304 or 316L with TIG welds, pickled and passivated interiors, optional PU insulation, dimple cooling jacket, CIP spray ball and dished or conical outlets. Tell us your product, batch size and ceiling height for a sized recommendation.
