7500L Red Wine Fermentation Tank with Dimple Cooling Jacket for Winery Use
A 7500 L red wine fermenter built for wineries crushing eight to ten tons per day. Dimple glycol jacket, SUS304 or 316L shell, TIG-welded and passivated, insulated for real cellar conditions. We size jacket area, port layout, and finish around your fruit, fermentation temperature target, and available space.
750L Stainless Jacketed Conical Beer Fermenter for Craft Breweries
This 750L stainless steel jacketed conical fermenter is designed for craft breweries and brewpubs that need reliable temperature control, sanitary construction, and flexible tank configurations. It supports ale, lager, IPA, stout, and sour production with SUS304 or 316L options, dimple cooling jackets, CIP spray ball, pressure relief valve, and tri-clamp fittings. Available with custom cone angles, finishes, and glycol connections.
7BBL 304 Stainless Steel Conical Brewing Fermenter with Cooling Jacket
A 7BBL 304 stainless unitank built for craft breweries that need real temperature control, not a single-zone jacket. Two or three independent cooling zones, Ra 0.8 µm internal welds, 15 psi working pressure, and a PRV sized to the tank. Includes specs, sizing guidance, and answers on chiller load, CIP ports, and 304 vs 316L selection.
7BBL Bright Beer Tank | 304/316 Pressure Vessel with Cooling Jacket
A 7 BBL bright beer tank built as a true pressure vessel with dimple cooling jacket for carbonation, cold crash and storage. Available in 304 or 316L stainless with pickled and passivated welds, 80 mm insulation, CIP spray ball, racking arm and adjustable relief valve. Custom fitting layouts and finishes to match your existing brewhouse.
7BBL Bright Beer Tank SUS304 Brite Tank Craft Brewery Equipment
A 7 BBL bright beer tank in SUS304 for carbonation, cold crashing and serving. Dimple glycol jacket, 1 bar working pressure, 0.4–0.6 µm interior finish, CIP and carb stone as standard. Built for brewpubs and small production breweries running 7 BBL batches, with 316L and cone-jacket options available.
7BBL Conical Beer Fermentation Tank with Cooling Jacket | Unitank for Craft Brewery
A 7BBL conical fermentation tank with glycol cooling jacket, built in 304 or 316L stainless steel with a 60-degree cone, 15 psi working pressure and CIP spray ball. Sized for brewpubs and small craft breweries that need reliable temperature control, clean yeast drops and cold-crash capability without overbuilding capacity.
7BBL Conical Beer Fermenter | SUS304 Jacketed Pressurized Unitank
A 7 BBL jacketed, pressurized conical unitank in SUS304 for craft breweries and brewpubs. Ferment, dry hop and carbonate in one vessel, with dimpled glycol jackets, 60-degree cone, 1.5 bar working pressure and CIP spray ball. Includes specs, port options and sizing guidance before you request a quote.
7BBL Conical Beer Fermenter with Glycol Cooling Jacket for Micro Brewery
A 7BBL conical fermenter built for brewpubs and small production breweries, with glycol jackets on the cone and cylinder for fast crash cooling. Available in SUS304 or 316L, 0.4–0.6 µm interior polish, 1.5 bar working pressure, and full CIP fittings. Jacket zones, ports, and insulation configured to your cellar.
7BBL Craft Brewery Tank System | Fermenter, Bright Beer & Carbonation Tanks
A matched 7BBL tank set for craft breweries: conical fermenters, bright beer tanks and storage vessels built from SUS304 or 316L with dimpled cooling jackets, 3 bar design pressure and tri-clamp fittings. Sized for primary fermentation, conditioning, carbonation and cold storage in brewpubs and production cellars.
