Description
750L Jacketed Conical Fermenter for Craft Breweries
This 750L conical fermenter is built for breweries that need repeatable fermentation in a compact footprint. The jacketed body handles ale, lager, IPA, stout, and mixed-fermentation projects where temperature control affects ester profile, attenuation, and tank turn time. We manufacture the tank as a pressure vessel with a 60-degree cone, dimple cooling jackets, and sanitary fittings arranged for your brewhouse layout.
Material choices matter. Most craft breweries specify SUS304 for the product contact surfaces and exterior cladding. For sour beer, high-chloride water, or aggressive CIP chemistry, we can supply 316L on wetted parts and welds. Welds are purged, ground, and passivated; internal surfaces reach 0.4-0.8 µm Ra depending on your cleaning protocol. The cone and dish ends are formed to ASME-style profiles, and every jacket is pressure-tested before shipment.
Cooling jackets cover the cone and lower cylinder to pull temperature during active fermentation. Glycol enters through a manifold with isolation valves, and the tank includes a sample valve, racking arm, dry-hop port, CIP spray ball, and pressure relief valve. Working pressure is typically 15-30 psi, with a safety valve set to protect the tank during spunding or carbonation. CIP is straightforward: connect the spray ball to your pump and caustic loop, then verify return flow before running cycles.
Small brewpubs often run 7-14 day turnovers and need one or two tanks with flexible piping. Regional breweries may prefer larger cone angles, dual-zone jackets, and automated temperature control. The right 750L configuration depends on batch size, beer style, glycol supply, and ceiling height.
Technical Specifications
| Parameter | Standard Range |
|---|---|
| Nominal capacity | 750 L |
| Material | SUS304 or 316L |
| Inner finish | 0.4-0.8 µm Ra |
| Cone | 60° or 70° |
| Working pressure | 15-30 psi |
| Cooling | Dimple jacket, glycol |
| Connections | Tri-clamp, DIN, or SMS |
FAQ
Can this tank carbonate beer? Yes, with the correct pressure rating and relief valve setting. Confirm your target CO2 volume before ordering.
Do I need 316L? For standard ales and lagers, SUS304 is usually sufficient. Choose 316L for sours, high salinity, or harsh cleaning chemicals.
How many tanks should I order? Match tank count to brew length, fermentation time, and packaging schedule. A 750L tank is often a pilot or small production unit.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L-5000L Jacketed Stainless Steel Horizontal Beer Fermentation Tank
Horizontal 1000L–5000L fermentation tanks built in SUS304 or 316L with dimple glycol jackets, 2 bar design pressure, 50 mm insulation and sanitary tri-clamp fittings. Suitable for fermentation, conditioning and bright beer storage where ceiling height is limited. Custom port layouts, jacket areas and finishes are configured to your batch size and cellar layout.
1000L Stainless Steel Unitank Fermenter for Ale Lager Stout Craft Brewing
1000L stainless steel unitank for ale, lager, stout and porter production. A combined fermentation and conditioning vessel with dimple cooling jackets, 2 bar working pressure, CIP spray ball and a 60° cone. Built in SUS304 or 316L with sub-0.6µm interior polish. Suits brewpubs and small commercial breweries stepping up to wholesale volume.
1000L 2000L Double Walled Jacketed Conical Beer Fermenter Stainless Tank
Double walled conical beer fermenters in 1000L and 2000L, built from SUS304 or 316L with dimpled cooling jackets, 80-100mm insulation and 1.5 bar working pressure. Supplied with manway, CIP spray ball, racking arm, dry hopping port and pressure relief valve, configured for craft breweries and beverage plants.
1000L Stainless Steel 304 Conical Fermenter With Glycol Jacket for Brewery
A 1000L SUS304 conical fermenter with a glycol jacket, built for brewpubs and small commercial breweries. Two cooling zones, 60° cone, 0.2 MPa working pressure, and CIP-ready tri-clamp fittings. Includes fabrication notes, a full specification table, and answers on tank sizing, stainless grade selection, and port configuration.
1000 Liter Banana Beer Fermenter Fermentation Tank Container
A 1000 liter banana beer fermenter built for high-solids fruit fermentation, with 60-degree cone, dimpled cooling jacket, SUS304 or 316L wetted parts, CIP spray ball, and sanitary tri-clamp ports. Designed for pilot to mid-size breweries, it supports temperature control, pulp handling, and easy cleaning. Customize pressure, insulation, and port layout for your brewhouse.
1000L-3000L Jacketed Conical Beer Fermentation Tank with CIP System
Jacketed conical fermentation tanks in 1000L, 2000L and 3000L working volumes, built in SUS304 or 316L with glycol cooling jackets, 1.5-3 bar design pressure and an integrated CIP spray ball system. We size cooling surface area and jacket coverage around your crash-cooling window, brew length and fermentation heat load.
10000 Liter Stainless Steel Conical Beer Fermenter for Sale
Our 10,000 L stainless steel beer fermenters are cylindrical-conical unitanks built for 100 hL batches, with SUS304 or 316L contact surfaces, dimple-plate glycol jackets, 3 bar design pressure and full CIP fittings. Cone angle, jacket layout, ports and insulation are configured around your brewhouse, beer style and available floor space.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
