Description
Commercial 700L Three-Vessel Brewhouse With Electric Heating and Hot/Cold Water
This 700L brewhouse is a practical step up from pilot systems for brewpubs and regional craft breweries producing roughly 6 US barrels per batch. The three-vessel layout separates mash/lauter, kettle, and whirlpool so brewers can overlap steps and keep the day moving. Electric heating suits sites without a boiler, and the integrated hot and cold water tanks reduce external piping and floor space.
We build the frame and non-product-contact parts in SUS304. Wort-contact surfaces — vessel interiors, piping, and fittings — can be supplied in 316L where chloride-based cleaning or aggressive water chemistry is expected. Internal welds are ground flush, pickled, and passivated. Product-contact surfaces are polished to Ra ≤0.8 µm; exteriors get a 2B or brushed finish. Gaskets are FDA-compliant EPDM or FKM. Low-watt-density immersion heaters limit scorching, and the control panel uses PID loops with over-temperature and low-level interlocks.
The hot liquor tank is electric-heated and sized around 700–1000 L; the cold liquor tank is set up for knockout water. CIP is handled by a spray ball, CIP pump, and dedicated piping. We use tri-clamp, DIN, or SMS connections depending on your existing standard. Typical users are craft breweries, brewpubs, and contract producers running ales and lagers with batch sizes from 500 to 700 L.
Technical Specifications
| Batch size | 700 L |
| Vessels | 3 — mash/lauter, kettle, whirlpool |
| Material | SUS304 frame; 316L wort contact |
| Heating | Electric immersion, low watt density |
| Hot water tank | 700–1000 L |
| Cold water tank | 700–1000 L |
| Control | PID/PLC with safety interlocks |
| Surface finish | Ra ≤0.8 µm product contact |
| Connections | Tri-clamp, DIN, or SMS |
| Options | Steam heating, wort grant, aeration |
Common Questions
Can this brewhouse run on single-phase power? No — 700L electric heating typically requires a 3-phase supply. Confirm voltage, phase, and available amperage before ordering.
Do we need 316L everywhere? Not necessarily. 304 handles most brewhouse duties. 316L is worth considering for wort contact if your cleaning regime or water chloride level is aggressive.
How is CIP connected? We provide a CIP spray ball and dedicated CIP piping to the vessels. Your CIP pump and caustic tank connect via tri-clamp.
What information do you need for a quote? Batch size, beer styles, power supply, water tank volumes, floor space, and preferred connection standard.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10bbl SUS304 Craft Beer Brewery Equipment Line for Brewpub
This 10bbl stainless steel brewery line is built for brewpubs and small craft producers that need repeatable fermentation, clear temperature control and practical CIP access. We specify SUS304 vessels, dimpled cooling jackets, sanitary fittings and a compact layout. Share your batch size, beer styles and floor plan so we can confirm tank volume, cooling area and utility connections.
100HL SUS304 PLC Ginger Beer Fermenter with Alcohol Fermentation
100 hl SUS304 ginger beer fermentation equipment with PLC control for alcohol fermentation. Built for repeatable temperature steps, CIP access and daily production, with 316L and jacket options. We configure cone, valves, cooling area and control logic around batch size, solids load and available utilities.
1000L to 3000L Stainless Beer Fermenter Pressure Vessel with Agitator
These 1000L–3000L stainless steel beer fermenters combine pressure-rated vessels with agitator, dimple cooling jackets, cone bottom, and CIP access for breweries handling high-gravity, dry-hopped, fruit, or yeast-heavy batches. We fabricate in SUS304 or 316L, passivate product-contact welds, and configure ports, relief valves, and cooling zones around your batch size, piping, and available space.
1000L Microbrewery Beer Brewing Equipment Integrated Mash System Stainless Steel
This 1000L microbrewery brewhouse combines mash conversion, lautering, boiling and whirlpool in a compact stainless steel package. We build the integrated saccharification system for craft breweries that need repeatable step mashing, stable temperature control and practical CIP access. The page covers material options, jacket and piping details, utility requirements and configuration questions to settle before requesting a quotation.
1000L Turnkey Craft Brewery System with Fermentation Tank & CIP
A 1000L turnkey brewhouse with conical fermentation tank, glycol cooling jackets and CIP station. We fabricate the vessels in SUS304 or 316L, hydro-test every jacket and match chiller capacity to your crash cooling peak. Send your batch size, beer styles and tank count for a configuration that fits your floor space.
1000L 1500L Stainless Craft Beer Fermentation Tank for Micro Brewery
A 1000L or 1500L stainless steel fermentation tank for craft breweries and microbreweries. We build conical-bottom tanks with cooling jackets, CIP piping, pressure-rated fittings and optional SUS316L contact surfaces. This page covers construction details, practical configurations, specifications and selection questions for brewers comparing tank volume, cooling area and vessel layout.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
