250L Stainless Steel Refrigerated Beer Fermentation Tank for Sale
A 250 liter stainless steel refrigerated fermentation tank with dimple glycol jacket, 60 degree cone and 0.2 MPa working pressure. Built in SUS304 or 316L with polished, passivated product contact surfaces. Suited to brewpubs, pilot breweries and taprooms running 2-barrel batches, with optional two-zone cooling and dry hop port.
2BBL Conical Fermentation Tank | 304 SS Unitank, Cooling Jacket, CE
A 2 BBL conical unitank in 304 stainless with a dimpled glycol jacket on the cone and lower body. Built for taprooms and nano breweries that ferment, dry hop, and carbonate in one vessel, with tri-clamp fittings, CIP spray ball, 1 bar working pressure, and CE certification. 316L available for sours.
2BBL Pressure Conical Fermenter | Isobaric Carbonation Tank for Craft Brewery
A 2BBL pressure fermenter lets small breweries ferment, carbonate, and transfer under pressure without oxygen pickup. SUS304 build, 15–30 PSI working pressure, dimpled cooling jackets, and CIP-ready. This guide covers material choices, safety valve requirements, and how to size the right tank for your batch volume.
3.5BBL 5BBL Nano Brewery 304SS Double Jacket Unitank Conical Fermenter
Built for nano breweries and brewpubs, this 3.5-5 BBL unitank combines 304 stainless steel construction, a double cooling jacket, and a conical bottom for clean yeast harvest. It supports fermentation, carbonation, and transfer in one vessel. We detail materials, pressure relief, CIP setup, specs, and selection guidance for small-batch brewers comparing tank volume and glycol demand.
30,000L Red Wine Fermentation Tank | Dimple Jacket Winery Fermenter
A 30,000 L red wine fermenter built with a dimple jacket welded directly to the shell, sized for primary fermentation and extended maceration. We cover 304 vs 316L selection, weld finishing, jacket coverage for warm cellars, port and CIP layout, and the pressure limits that matter when your glycol chiller serves the whole cellar.
300 Gallon Conical Fermenter Wine Tank for Beverage and Wine Processing
A 300 gallon conical fermenter wine tank built for beverage and wine processing. Available in SUS304 or SUS316L with dimple glycol jacket, CIP spray ball, racking arm and pressure relief. Use it for red or white fermentation, lees separation and temperature control. We match cone, manway and fittings to your batch size, cleaning method and cellar layout.
30000L Dimple Plate Jacketed Wine Fermentation Tank for Fruit Wine
A 30,000 L dimple plate jacketed fermenter built for commercial wineries and fruit wine producers. SUS304 or 316L shell, 2–3 cooling zones, 80–100 mm insulation, and CIP-ready fittings. Review capacity ranges, surface finish, outlet sizing, and the pressure limits that decide how this tank fits your cellar before requesting a quote.
30000L Red Wine Fermenter with Cooling Jacket for Large Scale Winery
Built for large-lot red fermentation, this 30,000 L jacketed tank holds 25,000–27,000 L of must with dimple cooling on the lower shell and cone. We size jacket area, glycol flow and relief settings around your Brix, target temperature and plant water chemistry. Shell, welds and finish are documented for winery QA review.
