2BBL Conical Fermentation Tank | 304 SS Unitank, Cooling Jacket, CE
A 2 BBL conical unitank in 304 stainless with a dimpled glycol jacket on the cone and lower body. Built for taprooms and nano breweries that ferment, dry hop, and carbonate in one vessel, with tri-clamp fittings, CIP spray ball, 1 bar working pressure, and CE certification. 316L available for sours.
2BBL Pressure Conical Fermenter | Isobaric Carbonation Tank for Craft Brewery
A 2BBL pressure fermenter lets small breweries ferment, carbonate, and transfer under pressure without oxygen pickup. SUS304 build, 15–30 PSI working pressure, dimpled cooling jackets, and CIP-ready. This guide covers material choices, safety valve requirements, and how to size the right tank for your batch volume.
2bbl Turnkey Brewhouse System for Small-Scale Beer Production
This 2 bbl turnkey brewhouse is built for pilot batches, taproom releases and recipe trials. We configure mash/lauter, kettle/whirlpool, HLT, heat exchanger, pump, piping, CIP and controls around your utilities and floor plan. Fermenters and glycol can be included. Fabrication uses SUS304 or 316L where needed, with sanitary welds and tested jackets.
3-Vessel Mini Craft Brewhouse | 2-Tank Stainless Beer Brewing Equipment
A compact two-tank, three-vessel brewhouse for pubs and small craft breweries. Built in SUS304 or 316L with sanitary welds, CIP-ready ports, and steam or electric heating, it supports 200–1,000 L batches. Configure mash/lauter, kettle/whirlpool, and hot liquor functions around your brew sheet and available floor space.
3.5BBL 5BBL Nano Brewery 304SS Double Jacket Unitank Conical Fermenter
Built for nano breweries and brewpubs, this 3.5-5 BBL unitank combines 304 stainless steel construction, a double cooling jacket, and a conical bottom for clean yeast harvest. It supports fermentation, carbonation, and transfer in one vessel. We detail materials, pressure relief, CIP setup, specs, and selection guidance for small-batch brewers comparing tank volume and glycol demand.
30,000L Red Wine Fermentation Tank | Dimple Jacket Winery Fermenter
A 30,000 L red wine fermenter built with a dimple jacket welded directly to the shell, sized for primary fermentation and extended maceration. We cover 304 vs 316L selection, weld finishing, jacket coverage for warm cellars, port and CIP layout, and the pressure limits that matter when your glycol chiller serves the whole cellar.
300 Gallon Conical Fermenter Wine Tank for Beverage and Wine Processing
A 300 gallon conical fermenter wine tank built for beverage and wine processing. Available in SUS304 or SUS316L with dimple glycol jacket, CIP spray ball, racking arm and pressure relief. Use it for red or white fermentation, lees separation and temperature control. We match cone, manway and fittings to your batch size, cleaning method and cellar layout.
30000L Dimple Plate Jacketed Wine Fermentation Tank for Fruit Wine
A 30,000 L dimple plate jacketed fermenter built for commercial wineries and fruit wine producers. SUS304 or 316L shell, 2–3 cooling zones, 80–100 mm insulation, and CIP-ready fittings. Review capacity ranges, surface finish, outlet sizing, and the pressure limits that decide how this tank fits your cellar before requesting a quote.
