Description
A 10 BBL two-vessel brewhouse suits breweries moving from pilot batches into repeatable 10-barrel production. We build the mash/lauter tun and kettle/whirlpool as separate vessels with matched steam jackets, piping and controls so brewers can hold step mashes, run a clean sparge and transfer wort without fighting temperature swings.
SUS304 is our standard wetted-material choice for beer. We TIG weld contact joints, passivate after fabrication, and finish visible surfaces to a practical sanitary standard. Polishing grit is agreed at order; 320–400 grit inside is common. Gaskets, tri-clamp connections and valve seats are specified by process duty, not by catalog habit. Steam jackets receive pressure testing, and the kettle uses a safety valve matched to design pressure. Drain outlets sit at the low point, and we check them against the floor plan before shipment.
The layout fits craft breweries, brewpubs and contract producers with limited floor space. A two-vessel set works well when brewhouse labor is shared and batch turnover matters. Breweries with high dry-hop loads or frequent CIP cycles should discuss valve dead legs and drain slope early. Steam supply matters. If your boiler cannot hold pressure during kettle boil, batch times drift.
| Item | Specification |
|---|---|
| Batch size | 10 BBL / approx. 1,170 L |
| Vessels | Mash/lauter tun, kettle/whirlpool |
| Material | SUS304 contact surfaces; options on request |
| Heating | Steam jackets, pressure-tested |
| Connections | Tri-clamp, CIP and steam/condensate ports |
| Control | Manual or PLC panel per project |
FAQ
Can we run high-gravity batches? Yes, but state target OG and kettle volume so we check jacket area and whirlpool behavior.
How is CIP handled? We position spray balls, drain points and port sizes around your cleaning cycle. Avoid blind runs and undersized drains.
What information do we need? Batch size, beer types, steam supply, floor space, tank count and preferred control level.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10BBL Brewhouse System | Mash Tun, Lauter Tun, Kettle & Whirlpool
A four-vessel 10BBL brewhouse built for breweries running multiple turns per day. SUS304 or 316L construction, TIG-welded and pickled contact surfaces, steam, electric or direct-fire heating, and PLC control options. Specifications, fabrication details and the information our engineers need before quoting.
500L Gas Fired Brewhouse and Draft Beer System for Craft Brewery
A 500L gas-fired brewhouse for restaurants and small craft breweries, configured for practical batch brewing with SUS304 or 316L contact parts, TIG welds, CIP connections, and optional hot liquor and whirlpool stages. We build around your gas supply, ventilation, floor space, and batch schedule so the hot side fits real production rather than a catalog layout.
500L Stainless Steel Fermentation Tank for Craft Beer and Kombucha Brewing
This 500L stainless steel fermentation tank is built for craft breweries and kombucha producers who need reliable temperature control, sanitary cleaning and repeatable batches. We manufacture the vessel around your process: SUS304 or 316L shell, cone, cooling jackets, CIP spray ball, pressure relief and brewery connections. Use it as a single-batch fermenter or as part of a small tank farm.
7BBL Bright Beer Tank SUS304 Brite Tank Craft Brewery Equipment
A 7 BBL bright beer tank in SUS304 for carbonation, cold crashing and serving. Dimple glycol jacket, 1 bar working pressure, 0.4–0.6 µm interior finish, CIP and carb stone as standard. Built for brewpubs and small production breweries running 7 BBL batches, with 316L and cone-jacket options available.
7BBL Conical Beer Fermentation Tank with Cooling Jacket | Unitank for Craft Brewery
A 7BBL conical fermentation tank with glycol cooling jacket, built in 304 or 316L stainless steel with a 60-degree cone, 15 psi working pressure and CIP spray ball. Sized for brewpubs and small craft breweries that need reliable temperature control, clean yeast drops and cold-crash capability without overbuilding capacity.
500L-1000L Jacketed Conical Beer Fermenter | SUS304 Temperature Controlled Pressure Vessel for Craft Brewery
Our 500L–1000L jacketed conical fermenter is built from SUS304 or 316L stainless steel with dimpled cooling jackets and 1.5–3 bar working pressure. We manufacture sanitary, temperature-controlled tanks for craft breweries, cideries, and pilot systems. Pickled interiors, ground welds, and customizable ports support clean fermentation and CIP.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
