Description
What a 3000L used brewhouse actually gives you
A 3000L brewhouse is a common step-up size for a regional craft brewery or a contract producer running repeat batches. It suits ales, lagers and seasonal releases where wort consistency matters more than showy automation. On used equipment, we check vessel shell condition, jacket integrity, agitator alignment, valve seats and control wiring before recommending a turnkey layout. The control panel is only one part of the value.
Fabrication details that affect service life
Most brewhouse vessels are built in SUS304; 316L is specified for higher chloride exposure or aggressive cleaning cycles. We inspect weld quality, passivation, internal polish and gasket material. EPDM and silicone seals are common, but the choice depends on cleaning chemicals and operating temperature. Jacketed vessels need a documented pressure test. A mash tun with poor jacket flow will slow step mashing and create uneven temperature ramps.
- Mash tun and lauter tun: verify false bottom fit, rake drive and wort collection.
- Kettle and whirlpool: check heating surface, trub removal and whirlpool behavior.
- Piping and valves: confirm CIP routing, sample valves and drainability.
Typical specification range
| Item | Typical range |
|---|---|
| Batch capacity | 3000L nominal |
| Material | SUS304 or SUS316L |
| Control | Automatic PLC with manual override |
| Heating | Steam jacket or electric, depending on site |
| Scope | Turnkey brewhouse with HLT, CLT and CIP options |
FAQ
Can a used 3000L brewhouse be re-commissioned? Yes, when the vessels pass inspection and worn seals, valves and sensors are replaced. Ask for jacket test records and motor test data.
How do I choose between 304 and 316L? Use 316L where chloride exposure or frequent caustic/acid cleaning is expected. For many breweries, 304 with proper passivation is sufficient.
What information speeds up a quotation? Batch size, beer styles, brews per day, available steam or power, floor space and existing tank connections.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10HL/15HL Commercial Brewhouse System | Beer Brewing Equipment
A 10 HL and 15 HL commercial brewhouse system for breweries that need repeatable wort production, sanitary stainless fabrication, and practical utility planning. We match vessel size, heating method, cooling area, and port layout to batch size, beer styles, brews per week, and available floor space. Includes specification guidance and procurement notes.
10BBL Steam 2-Vessel Mashing Brewhouse SUS304 Craft Brewery
This 10 BBL two-vessel brewhouse pairs a mash/lauter tun with a steam-heated kettle/whirlpool in SUS304 stainless steel. We cover jacket pressure testing, sanitary welding, tri-clamp piping, CIP access and control options for craft breweries, brewpubs and contract producers. Share batch size, beer styles, steam supply and floor plan so we can configure.
10BBL 2-Vessel Stainless Brewhouse for Commercial Craft Breweries
A 10 BBL two-vessel brewhouse built for brewpubs and small production breweries running three to five turns a day. SUS304 or 316L shells, dimple jackets, polished wort-contact surfaces and steam, electric or direct-fire heating. Includes batch flexibility, CIP design and the site details our engineers need before quoting a complete system.
1000L Turnkey Craft Brewery System with Fermentation Tank & CIP
A 1000L turnkey brewhouse with conical fermentation tank, glycol cooling jackets and CIP station. We fabricate the vessels in SUS304 or 316L, hydro-test every jacket and match chiller capacity to your crash cooling peak. Send your batch size, beer styles and tank count for a configuration that fits your floor space.
1000L–2000L Craft Beer Brewing System | Turnkey Brewery Equipment
Turnkey 1,000–2,000 L craft beer brewing systems built as two- or three-vessel brewhouses with SUS304 vessels, optional 316L contact surfaces, dimple glycol jackets and 360° CIP. We size kettles, heat exchangers and fermenters around your batch volume, brew frequency and floor space, then match utilities and controls to the building.
10000L Brewhouse System Mash Lauter Whirlpool Kettle Boiling Tank
A 10000 L brewhouse with mash/lauter tun, brew kettle, whirlpool and hot liquor tank, fabricated in AISI 304 or 316L with steam heating, 0.3 MPa working jackets and CIP-ready fittings. Sized for breweries running multiple turns per day that need consistent wort clarity and predictable heat-up rates.
10000L 20000L Commercial Craft Brewery Beer Brewing Equipment
Our 10,000 L and 20,000 L brewery systems are built for commercial batch consistency, not showroom specs. We match tank volume, jacket area, CIP routing and pressure rating to your beer styles, fermentation schedule and utility capacity. SUS304 or 316L construction, controlled welding and practical port layouts help your team run repeatable brews and plan maintenance without surprises.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
