10000L Stainless Steel Jacketed Beer Fermentation Tank for Industrial Breweries
This 10000L jacketed stainless steel fermenter is built for industrial breweries that need repeatable fermentation, crash cooling, and yeast recovery. We fabricate in SUS304 or 316L with two or three cooling zones, 60-degree cone, CIP spray ball, pressure relief, and sanitary fittings. Share your batch size and cellar plan for a configured quote.
1000L 2000L Double Walled Jacketed Conical Beer Fermenter Stainless Tank
Double walled conical beer fermenters in 1000L and 2000L, built from SUS304 or 316L with dimpled cooling jackets, 80-100mm insulation and 1.5 bar working pressure. Supplied with manway, CIP spray ball, racking arm, dry hopping port and pressure relief valve, configured for craft breweries and beverage plants.
1000L Jacketed Conical Beer Fermenter with Cooling for Breweries
A 1000L jacketed conical fermenter built for brewpubs and small production breweries. SUS304 or 316L body, dimpled cooling jacket on cylinder and cone, 0.3 MPa jacket pressure, rotating CIP spray ball, and 60° or 90° cone options. Sized for ale and lager fermentation with room to crash cool without stalling.
1500L Grape Wine Fermentation Tank with Cooling Jacket | Custom Build
Built for small wineries and trial lots, this 1500 L jacketed fermenter handles roughly 12.8 US barrels per batch. It uses a dimpled cone and lower-cylinder jacket sized for real crash cooling, 304 or 316L stainless construction, and a 60° conical bottom with racking arm. Configured around your glycol loop, CIP setup and floor space before shipping.
3500L Wine Fermentation Tank with Cooling Jacket and Insulation for Wineries
A 3500 L jacketed wine fermentation tank built for wineries moving from trial lots to full seasonal production. 304 or 316L stainless, dimple-plate glycol jackets on cone and side, 50–100 mm insulation, tri-clamp fittings and CIP spray ball. Sized from your fermentation curve, must volume and chiller capacity.
500L Stainless Steel Jacketed Isobaric Conical Beer Fermenter Tank
A 500L stainless steel isobaric conical fermenter with glycol cooling jackets and full insulation, built for craft breweries that carbonate and package directly from the tank. SUS304 or 316L construction, 60° cone, DIN or tri-clamp fittings, and CIP-ready internals with configurable jacket zones and port layouts.
500L-20000L Jacketed Grape Wine Fermentation Tank Custom Stainless Steel
Jacketed grape wine fermentation tanks from 500L to 20000L, built in SUS304 or 316L with dimple cooling jackets, 80mm insulation and full CIP connections. Suitable for red, white and rosé fermentation, settling and storage. Custom cone angles, port layouts and pressure ratings available for craft wineries and commercial plants.
6000L 60HL Jacketed Conical Beer Fermentation Tank for Industrial Brewing
A 6000 L (60 HL) jacketed conical unitank for industrial beer production lines, built in SUS304 or SUS316L with dimple or channel cooling jackets, full-penetration ground welds and 0.4–0.6 µm interior polish. Sized for fermentation, maturation and cold crash, with CIP spray ball, racking arm and 15 psi working pressure.
7500L Jacketed Cooling Red Wine Fermentation Tank for Winery Brewing
A 7500 L jacketed red wine fermentation tank built for wineries running skin-contact ferments and cold soaks. Dimple-plate cooling jackets, 304 or 316L stainless, 80 mm insulation, CIP spray ball and racking arm. Working volume around 6,000–6,400 L with headspace for cap rise. Custom ports, zoning and control options available.
CE Certified 600L SUS304 Conical Beer Fermenter with Cooling Jacket
A 600 L SUS304 conical fermenter with dimple cooling jacket, 60-degree cone and factory-set pressure relief, built for brewpubs and micro breweries running 500 L batches. Covers shell thickness, surface finish, CIP layout, glycol connections and pressure ratings, plus guidance on tank count, jacketed versus single wall, and carbonation limits.
Stackable Wine Fermenter with Jacket and Insulation for Red Wine Fermentation
A vertical stackable wine fermenter with a dimpled cooling jacket on the cone and lower cylinder, insulated with 50 mm PU foam and clad in stainless. Built in 304 or 316L, tri-clamp fittings throughout, 100 L to 5,000 L. Suited to red wine primary and secondary fermentation in small wineries and commercial cellars where floor space is tight.
Used Beer Isobaric Fermenter with Cooling Jacket 10HL 20HL 30HL 50HL
Used isobaric fermenters with glycol cooling jackets, available in 10, 20, 30 and 50 HL. Built in SUS304 or 316L with 60° or 70° cones, 1.5–3 bar working pressure, and full CIP and carbonation ports. Inspected, hydro-tested and re-passivated before shipment. Suitable for unitank fermentation, cold crash and in-tank carbonation in craft and commercial breweries.
