Description
10000L Jacketed Beer Fermenter for Industrial Brewing
A 10,000 L fermenter usually sits in a production brewery where batch consistency matters more than tank count. This unit is a cylindrical vessel with dished top and 60-degree cone bottom, sized for high-gravity ales, lagers, and mixed fermentation programs. We build it around your brewhouse knockout volume, expected fermentation curve, and cellar layout.
Temperature control comes from dimpled cooling jackets on the cone and lower cylinder. On a 10,000 L tank, we normally specify two or three independent zones, each with its own solenoid and RTD, so crash cooling does not fight active fermentation. Glycol inlet and outlet ports are positioned to suit your chiller header. If you run lagers, larger jacket surface and tighter zone control reduce diacetyl rest time.
Materials and fabrication
Product contact is SUS304 or 316L, often 3 mm shell and 4 mm cone on 10,000 L builds. 316L makes sense for sours, fruited beers, or high-chloride cleaning cycles. Interior welds are ground, pickled, and passivated; sanitary welds are full penetration. We polish to 0.4–0.8 µm Ra on request. Exterior can be brushed or insulated with PU foam and stainless cladding.
Top fittings include CIP spray ball, dry-hop port, pressure and vacuum relief valve, sample valve, and racking arm. Working pressure is typically 1.5–3 bar, with safety valve set according to vessel design. CIP uses the spray ball and cone drain; ensure pump flow reaches 1.5–2.5 m/s in the return line.
Specifications
| Parameter | Typical range |
|---|---|
| Gross volume | 10,000 L |
| Working volume | 8,000–8,500 L |
| Material | SUS304 / 316L |
| Cooling | 2–3 jacket zones |
| Pressure | 1.5–3 bar |
| Bottom | 60-degree cone |
FAQ
How do I choose capacity? Match working volume to knockout volume, not gross. Leave 15–20% headspace.
Do I need a conical bottom? Yes for yeast cropping and dry hopping; flat-bottom tanks suit bright beer only.
Can I CIP without opening the tank? With a correctly sized spray ball and return pump, yes.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L Stainless Steel Unitank Fermenter for Ale Lager Stout Craft Brewing
1000L stainless steel unitank for ale, lager, stout and porter production. A combined fermentation and conditioning vessel with dimple cooling jackets, 2 bar working pressure, CIP spray ball and a 60° cone. Built in SUS304 or 316L with sub-0.6µm interior polish. Suits brewpubs and small commercial breweries stepping up to wholesale volume.
1000L Craft Beer Fermenter with Top Manway & Dimple Cooling Jacket
A 1000L craft beer fermenter with a 60° cone, top manway and dimple cooling jacket. Built in SUS304 or 316L with a pickled, passivated interior, glycol jacket, CIP spray ball and tri-clamp fittings. Suited to brewpubs and small production breweries running repeatable fermentation schedules. Specifications, pressure ratings and selection guidance for your brewery.
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L 2000L Double Walled Jacketed Conical Beer Fermenter Stainless Tank
Double walled conical beer fermenters in 1000L and 2000L, built from SUS304 or 316L with dimpled cooling jackets, 80-100mm insulation and 1.5 bar working pressure. Supplied with manway, CIP spray ball, racking arm, dry hopping port and pressure relief valve, configured for craft breweries and beverage plants.
1000L SS304 Conical Beer Fermenter with Cooling Jacket, CIP & Sanitary Valves
A 1000L SS304 conical fermenter built for taprooms and small breweries, with glycol cooling jackets, sanitary tri-clamp fittings, and a CIP spray ball. We cover shell thickness, 304 versus 316L selection, working pressure and relief valve sizing, cone angle, and how to match tank count and cooling zones to your brewing schedule.
10000 Liter Stainless Steel Conical Beer Fermenter for Sale
Our 10,000 L stainless steel beer fermenters are cylindrical-conical unitanks built for 100 hL batches, with SUS304 or 316L contact surfaces, dimple-plate glycol jackets, 3 bar design pressure and full CIP fittings. Cone angle, jacket layout, ports and insulation are configured around your brewhouse, beer style and available floor space.
10000L Stainless Steel Beer Fermentation Tank, Conical Jacketed Brewery Tank
A 10,000 L jacketed conical fermenter built in SUS304 or 316L, with dimple cooling jackets on the cone and lower cylinder, 0.2 MPa working pressure, Ra ≤ 0.6 µm interior finish and rotating spray ball CIP. Sized for craft breweries moving from 10 bbl to 30 bbl, contract packers and beverage producers.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
