1500L Grape Wine Fermentation Tank with Cooling Jacket | Custom Build
Built for small wineries and trial lots, this 1500 L jacketed fermenter handles roughly 12.8 US barrels per batch. It uses a dimpled cone and lower-cylinder jacket sized for real crash cooling, 304 or 316L stainless construction, and a 60° conical bottom with racking arm. Configured around your glycol loop, CIP setup and floor space before shipping.
1500L Red Wine Fermentation Tank Dimple Jacket Temperature Control for Wineries
A 1500L stainless steel red wine fermentation tank with dimple jacket temperature control, built for small and mid-size wineries. The jacket holds fermentation temperature and supports cold soak, while the sloped bottom, side must door and tri-clamp fittings keep cap management and cleaning practical. Available in SUS304 or 316L.
1500L Red Wine Fermenting Tank with Dimple Cooling Jacket, SUS304
This 1,500 L red wine fermenter carries a dimple cooling jacket on both the cylinder and the 60-degree cone, SUS304 wetted parts, and 80 mm insulation. It suits must charges of 1,000–1,200 L where peak fermentation heat has to come down fast. Independent glycol zones, 316L wetted parts, and CIP fittings are available on request.
2000L Commercial Red Wine Fermenter with Cooling Jacket & Forklift Pockets
This 2000L commercial red wine fermenter is built for primary fermentation, maceration, and short-term storage. The cooling jacket helps manage heat during active yeast activity, while forklift pockets allow empty-tank repositioning in changing cellar layouts. Available in SUS304 or 316L wetted parts, with sanitary welds, CIP spray ball, racking arm, sample valve, and configurable glycol connections.
2000L Commercial Sparkling Wine Fermenter Tank with Cooling Jacket for Craft Winery
A 2000L pressure-rated sparkling wine fermenter with a dimple glycol cooling jacket on the cone and lower cylinder. Built in SUS304 or 316L, ground and passivated welds, CIP spray ball, racking arm, and a safety valve set at 2.5 bar. Suited to Charmat production, cideries, and contract bottling lines that need temperature control through fermentation and cold settling.
2000L Custom Wine Fermenter Tank with Cooling Chiller Vessel
A 2000L wine fermenter tank for small wineries, brewpubs, and contract producers. Built in SUS304 or SUS316L with glycol cooling jackets, sanitary welds, CIP fittings, and customizable cone, manway, and ports. Use it for fermentation, cold stabilization, or storage. Share batch size, wine type, tank count, and space so we can recommend the right cooling area and configuration.
2000L Jacketed Red Wine Fermenter with Temperature Control for Winery
A 2000 L jacketed fermenter built for red wine production, with dimple cooling zones on the side wall and cone, 304 or 316L contact surfaces, and tri-clamp fittings for racking, CIP, and glycol supply. We size jackets, relief valves, and port layouts around your must chemistry, batch schedule, and available floor space.
2000L Open Top Fermentation Tank PLC Dimple Cooling Jacket Wine Kombucha
This 2000L open top fermentation tank features a PLC-controlled dimple plate cooling jacket for precise temperature management. Built from SUS304 stainless steel with a polished interior, it is suited for wine, kombucha, and food fermentations. Includes CIP spray ball, bottom outlet, and 3-year warranty. Available for small or medium craft producers.
2000L Sparkling Wine Fermentation Tank with Dimpled Plate Jacket
A 2000L sparkling wine fermentation tank with a convex and concave dimpled plate jacket for even glycol cooling across the cone and body. Built in 304 or 316L stainless with TIG welds, Ra ≤0.8 µm interior finish, CIP spray ball, vacuum relief and up to 3 bar design pressure for secondary fermentation.
2000L Temperature Controlled Wine Fermentation Barrel, 500L to 5000L
Built in 500L to 5000L capacities, this jacketed wine fermentation barrel holds temperature through primary ferment and cold soak. Dimple cooling jackets, 50–80mm insulation, SUS304 or 316L shell, and CIP spray ball come standard. We fabricate to your glycol supply temperature, racking height, and fitting layout.
