CIP Washing System for Food Plants

A CIP skid has one job: circulate cleaning chemistry through tanks, pipes, fillers, and process lines at the right temperature, flow, and contact time, then rinse and drain without taking the line apart. Most buyers come to us after a manual washdown routine has become a bottleneck, or after a new vessel is installed with long return runs and hard-to-reach dead legs.

We build stainless CIP units around your cleaning circuits. A single-tank unit may suit a compact loop with one chemistry. Two- or three-tank arrangements keep acid, alkali, and hot water separate so operators do not cross-contaminate or lose time between steps. Tank volume, pump head, and return line size are chosen from pipe diameter, total loop volume, and the required flow velocity. Undersized return pumps and flat pipe runs are common reasons a system underperforms after installation.

Available project options include electric or steam heating, supply and return pumps, stainless valves and fittings, temperature, flow, pressure, and level monitoring, and manual, semi-automatic, or PLC/HMI control. We confirm every item for the quoted model; the list below is not a standard package.

Technical specifications

Where CIP units are used

• Dairy processing: milk lines, cheese vats, pasteurizers
• Beverage and juice plants: mixing tanks, fillers, transfer lines
• Breweries and distilleries: fermenters, bright tanks, transfer piping
• Sauce and liquid food production: cookers, holding tanks, pumps
• Cosmetics and pharmaceutical processing: stainless vessels and transfer loops

Pipe slope, drainability, sensor placement, and chemical compatibility matter as much as tank size. We review your loop layout before quoting, because a skid that fits one plant may not suit another.

FAQ

Q: How do I choose tank capacity?
A: Base it on total loop volume, rinse water needs, and how often you change chemistry. Long runs and large vessels usually need more tank volume and a larger return pump.

Q: Can one skid serve several lines?
A: Yes, with proper valving and separate circuits. We confirm circuit count and control logic against your cleaning schedule.

Q: Electric or steam heating?
A: Electric is simpler for smaller skids. Steam suits higher capacity or plants with an existing steam header. We size the heater for your required temperature rise and flow.

Request a custom CIP quote

Send your industry and processed product, tank and pipe details, required cleaning capacity, heat source, automation level, stainless grade, and installation location. Our engineers will review the loop and recommend a configuration, then quote the skid and optional tanks. We manufacture in-house and support custom layouts, controls, and tank sizes.