Description
This 2000L turnkey system is built around the fermentation tanks, not the other way around. We size the brewhouse to match the tank farm and the cooling load you can actually support. The tanks are 2000L working volume, 304 or 316L stainless, with dimpled cooling jackets and 2B interior finish. Isochoric operation means the tank is rated to hold pressure at fermentation temperature without CO2 blow-off, which matters if you plan to carbonate in-tank or package without a bright beer tank.
Shell thickness starts at 3 mm for the inner vessel; we go to 4 mm on tanks over 2 bar working pressure. All welds are TIG, ground and pickled on product contact surfaces. When you specify 316L, we change the jacket and fittings too—not just the shell. That detail shows up in the quote, and it should.
Small craft breweries often order three or four 2000L fermenters against a 10–15 BBL brewhouse. Commercial operations use them as finishing tanks ahead of filtration. The cone angle, racking arm height, and CIP spray ball position are set per your brewhouse layout, not off a catalog drawing.
Cooling jacket surface area is calculated from your crash-cooling target, not tank volume alone. If you plan to drop from 68°F to 34°F in 24 hours, tell us. The glycol supply temperature and jacket coverage change accordingly.
Pressure relief is set at 2.5 bar unless your process requires otherwise. CIP return line size, sample valve height, and dry-hop port location are confirmed before fabrication. We do not ship until the P&ID is signed off.
| Working volume | 2000 L |
|---|---|
| Material | SUS304 / 316L |
| Inner shell | 3–4 mm |
| Cooling | Dimpled jacket, 2 zones |
| Design pressure | 2.5 bar |
| Finish | 2B interior, pickled welds |
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
2000L 3000L Conical Unitank Beer Fermenting Vessel SUS304 SUS316L
A 2000L to 3000L conical unitank built for fermentation, conditioning, and carbonation in one vessel. SUS304 or SUS316L shell, dimple glycol jackets, TIG-welded and passivated product contact surfaces, working pressure up to 0.3 MPa. Configured with CIP, dry hop, racking arm, and bottom dump ports for brewpubs and commercial breweries.
800L Conical Fermentation Tank with Glycol Jacket | Stainless Unitank
An 800 L conical fermentation tank built for 5–6 bbl batches, with a dimpled glycol jacket on the cone and lower cylinder for controlled crash cooling. SUS304 or 316L construction, 60° cone, 1.5 bar working pressure, CIP spray ball and dry-hop port included. Sized for craft breweries running single-batch fermentations.
6000L Jacketed Conical Stainless Steel Beer Fermentation Unitank Isobaric
6000L jacketed conical unitank built for breweries running 40-60 hl batches. SUS304 shell with optional 316L cone, dimpled cylinder and cone cooling jackets, 0.4-0.6 um interior finish, and 1.5-3 bar working pressure. Configured for isobaric fermentation with CIP spray ball and rotating racking arm. Custom nozzle orientation and pressure ratings available on request.
Stainless Steel Conical Fermentation Tank for Home Beer Making Equipment
Stainless steel conical fermentation tanks from 30 L to 200 L, built for home breweries and pilot systems. SUS304 or 316L shells, 60° cones, glycol dimple jackets, tri-clamp ports and CIP spray balls. Includes specifications, pressure and relief guidance, and practical advice on choosing volume, cone angle and jacket coverage before requesting a quote.
1000L Stainless Steel Unitank Fermenter for Ale Lager Stout Craft Brewing
1000L stainless steel unitank for ale, lager, stout and porter production. A combined fermentation and conditioning vessel with dimple cooling jackets, 2 bar working pressure, CIP spray ball and a 60° cone. Built in SUS304 or 316L with sub-0.6µm interior polish. Suits brewpubs and small commercial breweries stepping up to wholesale volume.
1000L Jacketed Isobaric Beer Unitank Stainless Steel for Sale
A 1000 L jacketed isobaric unitank for breweries running 8–10 hl batches. Built in SUS304 or 316L with dimple glycol jackets, 60° cone, CIP spray ball, racking arm, sample valve, and pressure relief valve. Supports fermentation, conditioning, and carbonation in one vessel. Available with custom fittings, dry hop ports, carb stones, and insulation options for craft breweries and contract packers.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
