Description
Vertical Bright Beer Tanks for Carbonated Storage
We build these 10, 15, and 20 BBL vertical bright beer tanks for breweries that need stable, pressure-rated storage after fermentation. The tank holds beer during carbonation, clarification, and packaging. It is not a fermenter. A shallow cone or dished bottom helps solids drop away from the racking arm. We adjust working volume, jacket zones, and fittings to match your brewhouse and packaging line.
Materials and Fabrication
Product contact surfaces are 304 stainless steel. For high-chloride water or aggressive cleaning, we can quote 316L. Dimpled glycol jackets are welded to the side shell to add cooling area without taking floor space. After welding, we pickle and passivate heat-affected zones. Internal surfaces are polished to a sanitary finish, typically 0.4–0.8 µm Ra. Polyurethane insulation under stainless cladding reduces condensation and glycol load.
Pressure, Cooling, and Cleaning
Bright tanks operate under pressure. We supply a relief valve, pressure gauge, and carbonation stone port. The glycol jacket connects to your chiller loop; flow rate and jacket area determine how fast you can pull temperature before packaging. CIP uses a spray ball, sample valve, and racking arm. We can include butterfly valves, DIN or Tri-Clamp fittings, and a dry-hop port. Tell us your cleaning chemicals and cycle times so we confirm seal and gasket materials.
Typical Specifications
| Parameter | 10 BBL | 15 BBL | 20 BBL |
|---|---|---|---|
| Working volume | 10 BBL | 15 BBL | 20 BBL |
| Material | 304 SS | 304 SS | 304 SS |
| Cooling | Dimpled glycol jacket | Dimpled glycol jacket | Dimpled glycol jacket |
| Insulation | PU + SS clad | PU + SS clad | PU + SS clad |
| Pressure rating | 1.5–2.0 bar | 1.5–2.0 bar | 1.5–2.0 bar |
These tanks fit craft breweries, brewpubs, and contract packaging. A 10 BBL unit often suits a brewpub with low ceiling height. A 20 BBL tank works for a production brewery packaging several days per week. Check glycol capacity and floor space before specifying.
FAQ
Can I carbonate in this tank? Yes. Add a carbonation stone and pressure-rated relief valve. Time depends on beer temperature, head pressure, and stone placement.
Why a dimpled glycol jacket? It gives even shell coverage and leaves the interior smooth for CIP.
Do I need 316L? Most beer is fine in 304. If your water or cleaners carry high chlorides, ask us to review 316L.
What do you need for a quote? Batch size, beer type, working pressure, glycol supply temperature, available space, and connection standards.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
Glycol Jacket Isobaric Conical Beer Fermenter Tank 500L-3000L
Glycol jacketed isobaric conical fermenters from 500L to 3000L for breweries needing stable fermentation temperature, pressure control, and CIP cleaning. Available in SUS304 or 316L with single or dual cooling zones, sanitary fittings, and optional PLC control. We build each tank around batch size, beer style, available space, and working pressure.
100L to 50000L Insulated Horizontal Beer Storage Tank Pressure Vessel
Insulated horizontal beer storage tanks from 100 L to 50,000 L, built in SUS304 or SUS316L with PU insulation, stainless cladding and Ra ≤ 0.8 µm internal finish. Suited to bright beer storage, cider, kombucha and soda lines where cellar height rules out vertical vessels. Pressure ratings, CIP fittings and dimple-jacketed options available on request.
1000L Sanitary Fermentation Tank | Bright Beer Tank Brewery Equipment
A 1000L sanitary fermentation tank that also works as a bright beer tank, built in SUS304 or 316L with cone and cylinder glycol jackets, 0.2 MPa working pressure and full CIP fittings. Sized for 10 to 12 hl batches, it suits brewpubs and commercial breweries that need flexible, temperature-controlled vessels.
1000L BBT Craft Beer Kettle – Commercial Brewery Storage Tank
A 1000L brite beer tank built as a pressure vessel for carbonation, conditioning and bright beer storage. Dimple glycol jacket, 304 or 316L stainless, sanitary welds polished below 0.6 µm Ra, and 15 psi working pressure. Configured with CIP spray ball, racking arm, carbonation stone and dual-zone cooling for pub and production breweries.
1000L Bright Beer Tank Pressure Vessel for Beer Soda Carbonated Drinks
A 1000L bright tank holds beer, cider, soda, or carbonated water under pressure while carbonation stabilizes and the liquid clarifies before packaging. Built in SUS304 or 316L with dimple cooling jackets, PU insulation, and Ra 0.6 µm internal finish, it suits brewpubs and beverage plants packaging roughly 20 to 30 kegs per batch.
1000L 10BBL Bright Beer Tank | Brite Beer Serving Tank for Sale
A 1000L 10BBL bright beer tank for carbonation, clarification and serving. Built in SUS304 or 316L with dimple cooling jacket, 80-100 mm insulation, 400 mm manway and relief valve set at working pressure. Suitable for brewpubs and regional breweries needing cold-conditioning buffer before packaging or tap service.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
