Description
200L Conical Beer Fermenting Tank – Controlled Pressure, Dimple Jacketed
If you run a microbrewery with 1–3 BBL batches, a 200L conical fermenter with dimple jacket is often the right balance between capacity and floor space. The cone bottom helps yeast flocculate and drain cleanly, while the dimple jacket welded directly to the tank wall provides efficient cooling during active fermentation.
We build these tanks from 304 stainless steel as standard, with 316L available for aggressive cleaning regimes or high‑chloride water. The inner surface is pickled and passivated, then mechanically polished to a sanitary finish. Dimple jackets are formed by resistance-welding two sheets, creating a pressure‑tight channel for glycol or chilled water. This design gives a large cooling surface without the dead zones of a separate jacket.
Working pressure depends on the vessel rating. A typical 200L unit is rated for 1.5–2 bar (15–30 psi) on the inner tank and 0.5–1 bar on the jacket. A pressure relief valve is mandatory and must be sized correctly – undersized valves are a common mistake we see when brewers try to carbonate in the fermenter.
The CIP spray ball is positioned at the top, with a separate port for a blow‑off or dry‑hopping. All connections use tri‑clamp fittings so you can swap hoses between fermentation, CIP, and glycol loops without adapters. For small batches, a 1.5‑inch dump port handles yeast and trub; larger breweries often request 2‑inch.
Choose a 200L conical fermenter for pilot batches, taproom production, or seasonal releases. If you plan to carbonate naturally or capture CO₂, confirm the pressure rating and valve settings before ordering. We also fabricate custom jackets, leg heights, and manway sizes for tight spaces.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L 2000L Double Walled Jacketed Conical Beer Fermenter Stainless Tank
Double walled conical beer fermenters in 1000L and 2000L, built from SUS304 or 316L with dimpled cooling jackets, 80-100mm insulation and 1.5 bar working pressure. Supplied with manway, CIP spray ball, racking arm, dry hopping port and pressure relief valve, configured for craft breweries and beverage plants.
1000L Stainless Steel Conical Beer Fermenter Unitank with Cooling Jacket
A 1000L conical unitank built for real cellar conditions: 60° cone, SUS304 or 316L shell, dimple cooling jacket on cone and lower cylinder, and 1.5 bar working pressure with a 3 bar option. We cover fabrication details, glycol sizing, CIP routing and how to choose between two 1000L tanks and one larger vessel.
Conical Beer Fermenter Tank 1000L 1500L 2000L 3000L with Cooling Jacket
Jacketed conical fermenters from 1000L to 3000L, built in SUS304 or 316L with dimple cooling jackets on the cone and lower cylinder. Rated to 2 bar working pressure for unitank carbonation. Includes CIP spray ball, racking arm, dry-hop port and sample valve. Sized for brewpubs through regional breweries.
1000L/1500L Stainless Steel Beer Fermenter with Cooling Jacket
Built in 1000 L and 1500 L working volumes with dimple-plate cooling jackets on the cone and lower cylinder, these stainless fermenters hold 0.3 MPa design pressure for pressurized fermentation and carbonation. SUS304 is standard, 316L optional, with interior welds polished to Ra 0.4 µm. Each unit ships with a racking arm, CIP spray ball, sample valve and glycol connections.
10000 Liter Stainless Steel Conical Beer Fermenter for Sale
Our 10,000 L stainless steel beer fermenters are cylindrical-conical unitanks built for 100 hL batches, with SUS304 or 316L contact surfaces, dimple-plate glycol jackets, 3 bar design pressure and full CIP fittings. Cone angle, jacket layout, ports and insulation are configured around your brewhouse, beer style and available floor space.
10000L Stainless Steel Beer Fermentation Tank, Conical Jacketed Brewery Tank
A 10,000 L jacketed conical fermenter built in SUS304 or 316L, with dimple cooling jackets on the cone and lower cylinder, 0.2 MPa working pressure, Ra ≤ 0.6 µm interior finish and rotating spray ball CIP. Sized for craft breweries moving from 10 bbl to 30 bbl, contract packers and beverage producers.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
