Description
7BBL Brewhouse for Craft Production
This 7BBL automatic brewhouse is a two-vessel stainless system built around a mash kettle and filter. It suits breweries moving from pilot batches to repeatable 7-barrel production, especially where floor space is tight and operators need consistent mash temperature and lautering. We build the package to match steam, electric or direct-fire heating, and we confirm utility capacity before release.
Wetted parts are normally SUS304; SUS316L is available where chloride exposure or cleaning chemistry demands it. We control weld quality on tank shells, jackets and pipe runs, then pickle and passivate wetted seams. Interior surfaces are polished to a sanitary finish; exterior can be brushed or mirror-polished. Gaskets, seals and valve seats are selected for brewery CIP and steam service. Skid layout, pipe routing and control cabinet position are agreed from your site drawing, not from a catalog page.
Typical Specifications
| Item | Specification |
|---|---|
| Batch size | 7 BBL / about 8.2 hL |
| Vessels | Mash kettle and filter |
| Material | SUS304 standard; SUS316L optional |
| Heating | Steam, electric or direct fire |
| Control | Automatic PLC with recipe steps |
| Surface | Sanitary interior polish; brushed exterior |
| Connections | Tri-clamp; CIP and utility ports |
Use this size for taproom breweries, contract pilot work and seasonal releases. A 7BBL batch gives useful volume without tying up capital in a larger brewhouse. If you plan high-gravity beers, confirm original gravity and kettle duty; the nominal batch volume changes with recipe. For wheat beers or heavy adjunct loads, we adjust false bottom area, rake design and grant arrangement.
Purchase Notes
Send a plan view showing ceiling height, door width, drain location and boiler or power capacity. Also state beer styles, batches per week, and whether you need manual or automatic hop addition. These details decide vessel height, platform design, pipe slope and control enclosure rating.
FAQ
Can the system run 7BBL every day? Yes, if heating, cooling water and CIP cycles are sized for that schedule. We check recovery time between batches.
What should be ready before quotation? Batch size, beer styles, batches per week, utility data, floor plan and local electrical standard. Those details let us confirm the skid layout and automation level.
Tell us your batch size, beer style, brewhouse footprint and available utilities. We can recommend kettle volume, heating method and filter configuration for your brewery.
Related products
2000L Stainless Steel Isobaric Fermentation Tank for Craft Beer Brewing
A 2000L stainless steel isobaric tank built for craft breweries that need one vessel for fermentation, maturation and carbonation. SUS304 or 316L contact surfaces, 60° cone, 2–3 cooling zones, 0.3 MPa working pressure and full CIP fittings. We size jackets, ports and polish to your batch size, beer style and available floor space.
7BBL Conical Beer Fermentation Tank with Cooling Jacket | Unitank for Craft Brewery
A 7BBL conical fermentation tank with glycol cooling jacket, built in 304 or 316L stainless steel with a 60-degree cone, 15 psi working pressure and CIP spray ball. Sized for brewpubs and small craft breweries that need reliable temperature control, clean yeast drops and cold-crash capability without overbuilding capacity.
750L Stainless Jacketed Conical Beer Fermenter for Craft Breweries
This 750L stainless steel jacketed conical fermenter is designed for craft breweries and brewpubs that need reliable temperature control, sanitary construction, and flexible tank configurations. It supports ale, lager, IPA, stout, and sour production with SUS304 or 316L options, dimple cooling jackets, CIP spray ball, pressure relief valve, and tri-clamp fittings. Available with custom cone angles, finishes, and glycol connections.
500L-1000L Jacketed Conical Beer Fermenter | SUS304 Temperature Controlled Pressure Vessel for Craft Brewery
Our 500L–1000L jacketed conical fermenter is built from SUS304 or 316L stainless steel with dimpled cooling jackets and 1.5–3 bar working pressure. We manufacture sanitary, temperature-controlled tanks for craft breweries, cideries, and pilot systems. Pickled interiors, ground welds, and customizable ports support clean fermentation and CIP.
100L-400L Stainless Steel Beer Fermenting Vessel for Craft & Home Brew
These 100L to 400L stainless steel fermenting vessels are configured for pilot batches, taproom production, and small craft breweries. Choose SUS304 or SUS316L, conical bottom, glycol cooling jacket, CIP spray ball, and 1.5-3 bar working pressure. Tell us your batch size, beer type, tank quantity, and space so we can recommend the right volume, cooling area, and port layout.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
