Description
10,000 L Conical Fermenter for 100 HL Brewing
A 10,000 L vessel usually lands between pilot brewing and full commercial output. Brewers order this size when a 50 hl brewhouse runs double batches, or when a 100 hl brewhouse wants one fermentation cycle per tank. Cone geometry, cooling area, and pressure rating matter more than the nominal volume printed on the drawing.
We build the body from SUS304 or, for high-acid or long-term storage duty, SUS316L. Shell thickness runs 3 mm, cone 4 mm on most 100 hl tanks. Welds are TIG, ground and passivated on product-contact surfaces; interior finish is 0.4–0.8 µm Ra. Dimple or pillow jackets cover the cone and lower cylinder. Glycol at -4°C to 2°C holds lager fermentation without stratification, and jacket area is sized to pull a full batch down in a realistic crash-cooling window.
Working pressure of 0.2–0.3 MPa allows top cropping, carbonation, and pressure transfer. Every tank gets a relief valve, pressure gauge, and sample valve. A rotating CIP spray ball and dedicated CIP port keep cleaning separate from product piping. Dry hopping ports, racking arms, and carbonation stones are configured to your process.
| Parameter | Specification |
|---|---|
| Nominal volume | 10,000 L / 100 hl |
| Working volume | 8,000–8,500 L |
| Material | SUS304 / SUS316L |
| Cone | 60° or 70° |
| Cooling | Dimple jacket, glycol |
| Insulation | PU 80–100 mm |
| Working pressure | 0.2–0.3 MPa |
| Test pressure | 0.4 MPa |
| Fittings | CIP, sample, dry hop, racking arm |
FAQ
Can one 10,000 L tank replace two smaller fermenters? Yes, if your brewhouse can fill it in one or two turns and your glycol plant has the capacity. Splitting fermentation across two tanks gives more scheduling flexibility for different beer styles.
Do I need a conical bottom? For ale and lager fermentation, yes. The cone collects trub and yeast, so racking stays clean. Flat-bottom tanks suit bright beer storage, not active fermentation.
What information do you need for a quote? Batch size, beer type, tank count, available height, glycol supply temperature, and whether carbonation or pressure transfer is required.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L Jacketed Isobaric Beer Unitank Stainless Steel for Sale
A 1000 L jacketed isobaric unitank for breweries running 8–10 hl batches. Built in SUS304 or 316L with dimple glycol jackets, 60° cone, CIP spray ball, racking arm, sample valve, and pressure relief valve. Supports fermentation, conditioning, and carbonation in one vessel. Available with custom fittings, dry hop ports, carb stones, and insulation options for craft breweries and contract packers.
1000L Craft Beer Fermenter with Top Manway & Dimple Cooling Jacket
A 1000L craft beer fermenter with a 60° cone, top manway and dimple cooling jacket. Built in SUS304 or 316L with a pickled, passivated interior, glycol jacket, CIP spray ball and tri-clamp fittings. Suited to brewpubs and small production breweries running repeatable fermentation schedules. Specifications, pressure ratings and selection guidance for your brewery.
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L Stainless Steel Beer Brewery System with Fermentation Tank
A 1000L stainless steel brewery system built around SUS304 or SUS316L fermentation tanks with dimple-plate cooling jackets, 60–90 degree cones and Ra 0.6 micron interior polish. Working volume lands near 800–850L per batch, with tri-clamp connections for CIP, glycol and beer lines. Jacket zoning, pressure ratings and tank counts are matched to your production schedule.
1000L Stainless Steel 304 Conical Fermenter With Glycol Jacket for Brewery
A 1000L SUS304 conical fermenter with a glycol jacket, built for brewpubs and small commercial breweries. Two cooling zones, 60° cone, 0.2 MPa working pressure, and CIP-ready tri-clamp fittings. Includes fabrication notes, a full specification table, and answers on tank sizing, stainless grade selection, and port configuration.
1000L/1500L Stainless Steel Beer Fermenter with Cooling Jacket
Built in 1000 L and 1500 L working volumes with dimple-plate cooling jackets on the cone and lower cylinder, these stainless fermenters hold 0.3 MPa design pressure for pressurized fermentation and carbonation. SUS304 is standard, 316L optional, with interior welds polished to Ra 0.4 µm. Each unit ships with a racking arm, CIP spray ball, sample valve and glycol connections.
10000 Liter Stainless Steel Conical Beer Fermenter for Sale
Our 10,000 L stainless steel beer fermenters are cylindrical-conical unitanks built for 100 hL batches, with SUS304 or 316L contact surfaces, dimple-plate glycol jackets, 3 bar design pressure and full CIP fittings. Cone angle, jacket layout, ports and insulation are configured around your brewhouse, beer style and available floor space.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
