Description
This double-wall insulated fermenter serves wineries and breweries that need steady fermentation temperature without rebuilding the whole glycol loop. A dimpled cooling jacket covers the cone and lower cylinder, backed by 80–100 mm polyurethane foam and a stainless outer shell. We build 1000 L to 5000 L sizes and match height, diameter, and jacket area to your batch and ceiling clearance.
Wetted parts come in SUS304 or 316L. Use 316L for high-acid fruit, long aging, or aggressive CIP; 304 handles many ale and clean wine programs. Internal TIG welds are ground and passivated, then polished to 0.4–0.8 µm Ra when required. The cone bottom drops yeast and lees toward the outlet, so racking is cleaner and beer recovery improves. Ale and lager tanks usually get a 60° cone; wine tanks often use a shallower cone or flat bottom with a racking arm.
Cooling runs through the jacket and a 220V 200W control circuit that switches the glycol solenoid from a temperature probe. Working pressure is typically 0.2–0.3 bar on open-style wine tanks, or 1.5–2 bar on pressure-rated beer fermenters. The safety valve and gauge are sized to the tank, not chosen from a catalog. CIP uses a rotating spray ball, 1.5 in. tri-clamp ports, and a bottom drain. We can add dry-hop, sample, carbonation, and racking ports.
Small craft breweries often start with 1000–2000 L tanks and a shared chiller. Commercial plants need matched jacket area, larger manways, and multiple temperature zones. Wine storage benefits from low oxygen pickup and gentle pump-over connections.
Specifications
| Capacity | 1000–5000 L |
|---|---|
| Material | SUS304 / SUS316L |
| Insulation | 80–100 mm PU |
| Cooling | Dimpled jacket |
| Voltage / Power | 220V / 200W |
| Working pressure | 0.2–2 bar, model dependent |
| Bottom | 60° cone or flat, optional |
| Surface finish | 0.4–0.8 µm Ra |
| Warranty | 1 year |
FAQ
Can one tank handle beer and wine? Yes, but cone angle, pressure rating, and ports change. Tell us the process before we cut the shell.
How do I size the tank? Start with batch volume and add 20–25% headspace for foam and CO2.
What should I prepare for a quote? Batch size, beer or wine type, tank quantity, available height, glycol supply temperature, and voltage.
Is CIP included? We install spray ball and tri-clamp connections; CIP pump and chemical skid are separate.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
Forkable Stackable Square Wine Fermentation Tank 2000L 3000L Stainless Steel
Square, forkable and stackable wine fermentation tanks in 2000 L and 3000 L, built in SUS304 or SUS316L with dimple cooling jackets, TIG-welded and passivated interiors. Fork pockets in the base let a standard forklift move a full tank, and matching stacking feet double cellar capacity without extra floor space. Custom fittings, pressures and finishes available.
Wine Storage & Fermentation Tank 1000L–10000L Dimple Plate Cooling
Dimple plate cooled wine storage and fermentation tanks from 1000 L to 10000 L, built in SUS304 or SUS316L with full-penetration welds, pickled and passivated interiors, and 3 bar glycol jackets. Available with conical or sloped bottoms, CIP, racking arms and pressure relief for wineries of any scale.
10HL-10KL Commercial Red Wine Fermentation Tank with Half-Pipe Cooling Jacket
Half-pipe coil jacketed red wine fermenters from 10 HL to 10 KL, built in AISI 304 or 316L with Ra 0.8 µm interior finish, 80–100 mm insulation and a 0.3 MPa jacket tested at 0.6 MPa. Configured for cold soak, maceration and pomace removal, with must hatch, racking port, sample valve, CIP spray ball and thermowell.
1000L to 10000L Sparkling Wine Fermentation and Storage Tank with Cooling Jacket
Sparkling wine fermentation and storage tanks from 1000 L to 10000 L, built in SUS304 or SUS316L with dimple glycol jackets, adjustable pressure relief, and CIP spray ball. Sized for Charmat-style secondary fermentation and chilled storage, with polished wetted surfaces and insulated cladding for stable temperature control in the cellar.
1000L Single Wall Wine Fermentation Tank with Cooling Jacket Coil Belt
Our 1000L single wall wine fermentation tank uses an external cooling jacket coil belt for precise temperature control during red and white fermentation. Built in SUS304 or 316L, it offers CIP spray ball, racking arm, sample valve and glycol connections. We size cooling area and ports around your batch, yeast and chiller setup. Tell us your wine type, tank count and available space for a practical configuration.
1000L-3500L White Wine Fermentation Tank with Cooling Jacket for Fruit Wine
Jacketed white wine and fruit wine fermentation tanks in 1000L, 2000L, 3000L and 3500L working volumes. SUS304 or 316L construction, dimple cooling jackets, conical or sloped bottoms, CIP spray ball and tri-clamp glycol connections. Built to order with hydro-tested shells and jackets, safety valves and racking arms for small wineries and commercial cellars.
10000L White Wine Fermenter with Dimple Cooling Jacket 2B Polished
A 10,000 L white wine fermenter built from 3 mm SUS304 with a dimple cooling jacket, 2B polished interior and 80 mm PU insulation. Sized for wineries handling 60 to 100 tonnes per harvest, it covers temperature-controlled fermentation, cold settling and juice holding, with manway, CIP spray ball and racking arm included.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
