Description
Built for a Tank That Works Every Week
Most 10 BBL vessels we weld are not showpieces. They sit in a working brewhouse where the same tank ferments a hazy IPA in spring and a lager in winter, gets CIP\’d twice a week, and has to hold 2 bar during carbonation without a weeping weld. That is the environment this fermenter is designed around.
Shell, Cone, and Fabrication Details
Shell and dish ends are 304 stainless as standard. 316L earns its upcharge when your water is chloride-heavy or you run sour programs. The racking arm passes through a welded ferrule at the cone instead of a compression fitting, so it rotates to draw clear beer above the yeast bed without disturbing the seal. Beer outlet, sample valve, and CIP connections use Tri-Clamp or DIN sanitary fittings, seamless welded, pickled, and internally polished to 0.4-0.8 um Ra on all wetted surfaces. The exterior stays brushed 320 grit unless you want the visible cone mirrored for a taproom.
Cooling, Pressure, and Safety
Cone and lower-shell jackets, dimple or pillow plate, pull 10 BBL from 68F to 34F overnight on 28F glycol. Working pressure is 2 bar, hydro-tested at 3 bar, with an adjustable top-mounted relief valve and a separate CIP spray ball. Do not isolate the PRV to chase carbonation pressure; we have replaced enough dished heads to know how that ends.
Typical Specifications
| Working volume | 10 BBL (310 gal) |
| Total volume | 12.4 BBL |
| Material | 304 stainless, 316L optional |
| Interior finish | 0.4-0.8 um Ra, wetted surfaces |
| Cooling | Dimple jacket, cone and lower shell |
| Working pressure | 2 bar (29 psi) |
| Connections | Tri-Clamp / DIN sanitary |
| Insulation | 50 mm PU, stainless cladding |
Questions We Get Before the PO
Can I dry hop through the racking arm port? Use the 4 in top port instead. Running pellets through the arm port clogs the elbow and you will be pulling the arm to clear it.
One tank or two? If you package more than twice a week, two 10 BBL tanks usually beat one 20 BBL for scheduling, even though the footprint is larger.
What glycol capacity do I need? Plan on roughly 1.5 hp of chiller per jacketed tank at 28F supply.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L SUS304 Pressure Fermenter Tank with CIP for Craft Beer Brewery
A 1000L SUS304 pressure fermenter for craft breweries that want closed transfers, in-tank carbonation and dependable CIP. 3mm shell, Ra ≤0.4 µm interior, dimple-plate glycol jackets and 2 bar working pressure, with 60° cone as standard. Cone angle, 316L construction and connection layout are configured around your batch size and packaging line.
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
1000L Stainless Steel Conical Beer Fermenter Unitank with Cooling Jacket
A 1000L conical unitank built for real cellar conditions: 60° cone, SUS304 or 316L shell, dimple cooling jacket on cone and lower cylinder, and 1.5 bar working pressure with a 3 bar option. We cover fabrication details, glycol sizing, CIP routing and how to choose between two 1000L tanks and one larger vessel.
1000L Stainless Steel Beer Brewery System with Fermentation Tank
A 1000L stainless steel brewery system built around SUS304 or SUS316L fermentation tanks with dimple-plate cooling jackets, 60–90 degree cones and Ra 0.6 micron interior polish. Working volume lands near 800–850L per batch, with tri-clamp connections for CIP, glycol and beer lines. Jacket zoning, pressure ratings and tank counts are matched to your production schedule.
1000L Conical SUS304 Fermenter with Spunding Valve for Craft Brewery Beer
A 1000 L conical fermenter in SUS304 with a 60° cone, dimple cooling jackets, 0.2 MPa working pressure, and a spunding valve for natural carbonation. Built for brewpubs casting 10 hl brews, with DIN or Tri-Clamp ports, CIP spray ball, racking arm, and yeast harvest outlet. Custom glycol and thread configurations available.
1000 Liter Banana Beer Fermenter Fermentation Tank Container
A 1000 liter banana beer fermenter built for high-solids fruit fermentation, with 60-degree cone, dimpled cooling jacket, SUS304 or 316L wetted parts, CIP spray ball, and sanitary tri-clamp ports. Designed for pilot to mid-size breweries, it supports temperature control, pulp handling, and easy cleaning. Customize pressure, insulation, and port layout for your brewhouse.
10000L Conical Beer Fermentation Tank | 100HL Stainless Steel Fermenter
A 10,000 L conical fermenter suits 100 hl brewing schedules, double-batch 50 hl brewhouses, and commercial lager or ale production. Built in SUS304 or SUS316L with dimple glycol jackets, 0.2–0.3 MPa working pressure, CIP spray ball, and optional dry hopping or carbonation ports. Configured to your batch size, available height, and cooling capacity.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
