Description
What This 1000 L Tank Is Built For
A 1000 liter jacketed conical fermenter is usually the first tank size that moves a brewery from pilot batches into repeatable production. We build these vessels for ale, lager, cider, kombucha and similar fermented beverages. The cone supports yeast collection, dry hopping and easier dumping, while the dimpled cooling jacket gives the glycol loop enough surface area to hold lager fermentation temperatures without overshooting.
Materials, Welds and Finish
Product contact surfaces are normally SUS304 or 316L stainless steel. For beer, 304 handles most duty; 316L makes sense when chloride exposure, aggressive cleaning or mixed beverage production is expected. We TIG weld with full penetration on critical seams, then pickle and passivate. Interior finishes range from 2B mill to mirror polish depending on CIP practice and yeast handling. Exterior can be brushed or mirror polished. Insulation is PU or rock wool with a stainless outer shell.
Jacket, valves, sample port, dry hop port, CIP spray ball and racking arm are selected around your process, not a fixed catalog list.
Typical Specifications
| Parameter | Range |
|---|---|
| Gross volume | 1000 L / 10 hl |
| Working volume | 750-850 L |
| Material | SUS304 or 316L |
| Design pressure | 0.2-0.3 MPa inner, jacket tested separately |
| Cooling | Dimpled jacket or zoned jacket |
| Conical angle | 60-75 degrees |
| Connections | Tri-clamp or DIN, sized to your piping |
Pressure, CIP and Piping
The tank is not just a vessel. Relief valve setting, pressure gauge, blow-off arm and CIP return line must match the working pressure and cleaning cycle. If you plan to carbonate in the tank, specify the higher pressure rating before fabrication. CIP usually needs a spray ball sized for 1.5-2 bar supply pressure, with the return line sloped back to the pump. Glycol ports should be positioned so air locks do not form.
FAQ
Why use a conical bottom? It concentrates yeast and trub for removal without transferring the whole batch.
Do I need a jacket? For lagers and stable ales, yes. Glycol jackets let you crash cool and hold temperature.
304 or 316L? Use 316L when cleaning chemicals or chloride risk is high. Otherwise 304 is common.
Can I add dry hop and sample ports? Yes, we position them for your access height and racking method.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L 2000L Double Walled Jacketed Conical Beer Fermenter Stainless Tank
Double walled conical beer fermenters in 1000L and 2000L, built from SUS304 or 316L with dimpled cooling jackets, 80-100mm insulation and 1.5 bar working pressure. Supplied with manway, CIP spray ball, racking arm, dry hopping port and pressure relief valve, configured for craft breweries and beverage plants.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
1000L Conical Beer Fermenter with Glycol Jacket & SUS304 Tank for Microbrewery
A 1000L conical fermenter built in SUS304 or 316L with two-zone glycol jackets, 60° cone and 1.5 bar working pressure. Suited to taproom breweries and brewpubs moving past 5–7 BBL batches. Standard tri-clamp fittings for racking, dry hopping and CIP, with customizable control, insulation and pressure options for microbrewery use.
1000L SS304 Conical Beer Fermenter with Cooling Jacket, CIP & Sanitary Valves
A 1000L SS304 conical fermenter built for taprooms and small breweries, with glycol cooling jackets, sanitary tri-clamp fittings, and a CIP spray ball. We cover shell thickness, 304 versus 316L selection, working pressure and relief valve sizing, cone angle, and how to match tank count and cooling zones to your brewing schedule.
1000L-3000L Jacketed Conical Beer Fermentation Tank with CIP System
Jacketed conical fermentation tanks in 1000L, 2000L and 3000L working volumes, built in SUS304 or 316L with glycol cooling jackets, 1.5-3 bar design pressure and an integrated CIP spray ball system. We size cooling surface area and jacket coverage around your crash-cooling window, brew length and fermentation heat load.
10000L Conical Beer Fermentation Tank | 100HL Stainless Steel Fermenter
A 10,000 L conical fermenter suits 100 hl brewing schedules, double-batch 50 hl brewhouses, and commercial lager or ale production. Built in SUS304 or SUS316L with dimple glycol jackets, 0.2–0.3 MPa working pressure, CIP spray ball, and optional dry hopping or carbonation ports. Configured to your batch size, available height, and cooling capacity.
10000L Stainless Steel Beer Fermentation Tank, Conical Jacketed Brewery Tank
A 10,000 L jacketed conical fermenter built in SUS304 or 316L, with dimple cooling jackets on the cone and lower cylinder, 0.2 MPa working pressure, Ra ≤ 0.6 µm interior finish and rotating spray ball CIP. Sized for craft breweries moving from 10 bbl to 30 bbl, contract packers and beverage producers.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
