Description
A 10 BBL two-vessel saccharification set suits breweries that need repeatable wort but cannot justify the floor space or capital of a three-vessel line. The set combines mash/lauter tun and kettle/whirlpool. For most ales, brewers schedule two to three turns per day; lagers and high-gravity batches need longer lautering and boil, so plan utilities accordingly.
We build vessels from 304 or 316L stainless. Product contact surfaces are TIG welded, pickled and passivated, then finished to Ra ≤0.8 µm where required. Jackets and steam jackets are pressure-tested before insulation and cladding. Gaskets, clamps and manways follow standard sanitary patterns so replacement parts are straightforward. For brewhouses, the false bottom slot size and sparge arm layout matter more than polish alone—they affect run-off time and extract recovery.
| Parameter | Specification |
|---|---|
| Batch size | 10 BBL (approx. 11.7 hL) per turn |
| Vessel count | 2: mash/lauter tun, kettle/whirlpool |
| Material | SUS304 or 316L, optional cladding |
| Heating | Steam jacket, electric, or direct fire |
| Internal finish | Pickled and passivated; Ra ≤0.8 µm on request |
| Control | PLC or manual panel, recipe steps and alarms |
| Connections | Tri-clamp; wort, CIP, steam/condensate, cold water |
Typical users include brewpubs, regional craft breweries and contract plants adding a smaller specialty line. Before layout, check floor loading, ceiling height, boiler capacity and ventilation. A 10 BBL kettle with steam heating needs a matching steam supply; electric heating shifts demand to your power service. CIP is usually routed through spray balls in both vessels, with separate return paths to avoid cross-contamination.
FAQ: Can this set handle high-gravity brewing? Yes, but confirm kettle volume and whirlpool dimensions for the target original gravity. Which vessel should be first? Mash/lauter tun normally precedes kettle/whirlpool; piping and pump sizing must support transfer under worst-case grist loads. What spare parts should we stock? Door gaskets, clamp seals, spray balls and a spare pump seal. How long is delivery? Typically 45–75 days depending on material and heating choice.
Send your batch size, beer styles, brewhouse footprint and utility data. We can recommend vessel volume, heating method and layout for your brewery.
Related products
10BBL Steam 2-Vessel Mashing Brewhouse SUS304 Craft Brewery
This 10 BBL two-vessel brewhouse pairs a mash/lauter tun with a steam-heated kettle/whirlpool in SUS304 stainless steel. We cover jacket pressure testing, sanitary welding, tri-clamp piping, CIP access and control options for craft breweries, brewpubs and contract producers. Share batch size, beer styles, steam supply and floor plan so we can configure.
10BBL 2-Vessel Stainless Brewhouse for Commercial Craft Breweries
A 10 BBL two-vessel brewhouse built for brewpubs and small production breweries running three to five turns a day. SUS304 or 316L shells, dimple jackets, polished wort-contact surfaces and steam, electric or direct-fire heating. Includes batch flexibility, CIP design and the site details our engineers need before quoting a complete system.
1000L–2000L Turnkey Commercial Brewery System with Fermentation Tanks
Turnkey 1000L, 1500L, and 2000L brewery packages with conical fermentation tanks, glycol jackets, CIP, and matched piping. We size tanks around batch volume, beer style, cooling load, floor space, and cleaning routine. SUS304 is standard; SUS316L is available for aggressive conditions. Includes practical specifications and procurement FAQs for commercial breweries.
1000L–2000L Craft Beer Brewing System | Turnkey Brewery Equipment
Turnkey 1,000–2,000 L craft beer brewing systems built as two- or three-vessel brewhouses with SUS304 vessels, optional 316L contact surfaces, dimple glycol jackets and 360° CIP. We size kettles, heat exchangers and fermenters around your batch volume, brew frequency and floor space, then match utilities and controls to the building.
10000L Brewhouse System Mash Lauter Whirlpool Kettle Boiling Tank
A 10000 L brewhouse with mash/lauter tun, brew kettle, whirlpool and hot liquor tank, fabricated in AISI 304 or 316L with steam heating, 0.3 MPa working jackets and CIP-ready fittings. Sized for breweries running multiple turns per day that need consistent wort clarity and predictable heat-up rates.
10000L SUS304 Commercial Brewery Beer Brewing Tank with Pressure Vessel
This 10,000 L SUS304 brewery tank is built for pressure-rated fermentation or bright-beer duty. We confirm jacket area, polish, relief setting and CIP layout against your batch size, beer type and glycol supply. Conical or dish bottom, 316L upgrades and valve packages are specified before fabrication. Tell us your production details for a practical tank configuration.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
