Description
We build this 1000L all-in-one brewing system for pubs and craft breweries that need repeatable batches without a full tower brewhouse. Mash/lauter, kettle/whirlpool, hot liquor tank, pump, plate heat exchanger and controls sit on one skid. It suits producers moving from pilot batches to commercial supply, where floor space and transfer losses matter. Check power, drainage, ceiling height and grain-out access before sizing the skid.
Material selection follows the cleaning regime. We normally use AISI 304 for shells and offer 316L for wetted parts in coastal plants or high-chloride water. Product-contact welds are TIG, ground, pickled and passivated. Internal finish is Ra 0.8 μm or better where wort and CIP chemicals sit. EPDM or silicone seals are chosen for caustic and temperature compatibility. A 1000L unit may run two brews per day, so jacket area, pump curves and CIP spray coverage matter more than a long option list.
Typical applications include taproom breweries, brewpub production and craft breweries adding a small-batch line. High-gravity recipes need confirmation of mash tun dead space and lauter rake clearance. Lager schedules need matching glycol-jacketed uni-tanks and chiller capacity. Leave room in skid piping for CIP return, wort aeration and later expansion.
| Item | Specification |
|---|---|
| Batch volume | 1000 L nominal |
| Configuration | 2-vessel or 3-vessel, skid mounted |
| Material | AISI 304; 316L wetted parts optional |
| Heating | Electric or steam, site dependent |
| Finish | Product-contact welds Ra 0.8 μm or better |
| Controls | PLC/HMI with temperature and step control |
| CIP | Spray balls, manifold and return pump |
FAQ
Can it run with electric heating? Yes, for smaller grids; steam is preferred for faster step mashing and lower peak demand.
Why 316L? It resists chloride pitting better than 304; use it where water or cleaning chemistry demands it, not as a default upgrade.
How is CIP connected? A dedicated manifold, spray balls and return pump connect to the skid; we set valve sequence and dead-leg limits during layout.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
2-Vessel Stainless Steel Beer Brewing System for Small Breweries
Two-vessel stainless brewhouses combining a mash/lauter tun with a kettle/whirlpool, built for hotel breweries, brewpubs, and small craft plants. 304 or 316L shells, dimple jackets, wedge wire false bottoms, and hard-piped wort and CIP runs. Batch sizes from 200 to 2,000 L, with manual or PLC control.
2000–10000L High-Efficiency Stainless Steel Brewhouse System
This stainless steel brewhouse system covers 2000 L to 10000 L batches for craft breweries and brewpubs. We specify SUS304 or 316L contact surfaces, controlled welding and passivation, dimple jackets for heating and cooling, and PLC or manual control. Layout, CIP routing and utility connections are matched to your brew house and cellar capacity.
5–15 BBL Stainless Steel Brewhouse System for Craft Beer Brewing
We build 5–15 BBL stainless steel brewhouse systems for craft breweries that need repeatable extract recovery and a layout that fits existing floor space. Choose two- or three-vessel configuration, SUS304 or 316L contact surfaces, steam or electric heating, and manual to PLC control. Our team reviews batch size, beer style, utilities and expansion plans before recommending vessel volume and piping.
1000L-2000L Turnkey Brewery System | Stainless Steel Beer Brewing Equipment
A 1000L to 2000L turnkey brewery package covering brewhouse, hot and cold liquor tanks, and conical fermenters. Built in SUS304 or 316L with dimple cooling jackets, passivated welds, CIP spray balls, and PLC control. Sized against your batch volume, beer styles, and fermentation schedule rather than a fixed catalog configuration.
10000L SUS304 Commercial Brewery Beer Brewing Tank with Pressure Vessel
This 10,000 L SUS304 brewery tank is built for pressure-rated fermentation or bright-beer duty. We confirm jacket area, polish, relief setting and CIP layout against your batch size, beer type and glycol supply. Conical or dish bottom, 316L upgrades and valve packages are specified before fabrication. Tell us your production details for a practical tank configuration.
10000L 20000L Commercial Craft Brewery Beer Brewing Equipment
Our 10,000 L and 20,000 L brewery systems are built for commercial batch consistency, not showroom specs. We match tank volume, jacket area, CIP routing and pressure rating to your beer styles, fermentation schedule and utility capacity. SUS304 or 316L construction, controlled welding and practical port layouts help your team run repeatable brews and plan maintenance without surprises.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
