Description
What This Tank Is Built For
A 15 BBL conical fermenter is a working tank, not a showpiece. It has to hold pressure, crash cool, dump yeast, and clean up fast enough that your cellar schedule does not slip. We build these unitanks for breweries running ales and lagers where temperature control is the difference between a consistent flagship and a batch that goes down the drain.
Materials and Fabrication
We use 304 stainless steel as standard, with 316L available for aggressive cleaning chemicals or coastal environments. The inner shell is typically 3 mm, dimple jacket 1.5–2 mm depending on pressure rating. Welds are full-penetration TIG, ground and passivated on product-contact surfaces. Interior finish is 2B or better; we can go to 320 grit polish if your QA program requires it. Every tank is hydro-tested and pressure-tested before shipment.
Cooling and Pressure
The jacket covers the cone and lower cylinder. That is where active fermentation generates heat. Glycol enters through a dedicated port, and we size the jacket area around your crash-cooling target, not just the batch volume. Working pressure is normally 15 psi, with a safety valve set to match. Do not confuse working pressure with the relief setting. The valve protects the tank; the working pressure tells you what you can ferment under.
Ports, CIP, and Connections
Standard layout includes a racking arm, sample valve, dry-hop port, CIP spray ball, and pressure gauge. We can add a carb stone, butterfly valves, or a separate blow-off arm. Tell us how you plan to CIP, and we will place the spray ball so the cone and sidewalls actually get contact.
Selection Notes
A 15 BBL tank fits most microbreweries. A 30 BBL unitank makes sense when you are packaging in larger runs and want fewer transfers. Small brewpubs often need smaller batches and more flexibility. Commercial breweries care about floor space, glycol load, and how the tank ties into an existing cellar.
FAQ
Can this tank carbonate? Yes, with the right pressure rating and carbonation stone.
What voltage? We supply tanks without controls unless requested. Glycol units are specified separately.
Lead time? Typically 30–45 days depending on configuration.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L-10T Stainless Steel Beer Fermenter with Glycol Control for Breweries
Stainless steel beer fermenters from 1000 L to 10 T, built with dimple cooling jackets, 60° or 70° cones, CIP spray balls and pressure relief. We cover SUS304 and 316L selection, polish and welding standards, working pressure limits, and how to size a tank for your actual batch rather than your brewhouse rating.
1000L SUS304 Pressure Fermenter Tank with CIP for Craft Beer Brewery
A 1000L SUS304 pressure fermenter for craft breweries that want closed transfers, in-tank carbonation and dependable CIP. 3mm shell, Ra ≤0.4 µm interior, dimple-plate glycol jackets and 2 bar working pressure, with 60° cone as standard. Cone angle, 316L construction and connection layout are configured around your batch size and packaging line.
1000L Jacketed Conical Beer Fermenter with Cooling for Breweries
A 1000L jacketed conical fermenter built for brewpubs and small production breweries. SUS304 or 316L body, dimpled cooling jacket on cylinder and cone, 0.3 MPa jacket pressure, rotating CIP spray ball, and 60° or 90° cone options. Sized for ale and lager fermentation with room to crash cool without stalling.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
1000L Stainless Steel Beer Brewery System with Fermentation Tank
A 1000L stainless steel brewery system built around SUS304 or SUS316L fermentation tanks with dimple-plate cooling jackets, 60–90 degree cones and Ra 0.6 micron interior polish. Working volume lands near 800–850L per batch, with tri-clamp connections for CIP, glycol and beer lines. Jacket zoning, pressure ratings and tank counts are matched to your production schedule.
1000L SS304 Conical Beer Fermenter with Cooling Jacket, CIP & Sanitary Valves
A 1000L SS304 conical fermenter built for taprooms and small breweries, with glycol cooling jackets, sanitary tri-clamp fittings, and a CIP spray ball. We cover shell thickness, 304 versus 316L selection, working pressure and relief valve sizing, cone angle, and how to match tank count and cooling zones to your brewing schedule.
1000 Liter Banana Beer Fermenter Fermentation Tank Container
A 1000 liter banana beer fermenter built for high-solids fruit fermentation, with 60-degree cone, dimpled cooling jacket, SUS304 or 316L wetted parts, CIP spray ball, and sanitary tri-clamp ports. Designed for pilot to mid-size breweries, it supports temperature control, pulp handling, and easy cleaning. Customize pressure, insulation, and port layout for your brewhouse.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
