Description
500L Open-Top Red Wine Fermenter
This 500L open-top tank is for red wine fermentation where skins and cap need regular attention. The open top allows punch-down, pump-over, and inspection during maceration. We build it as a working cellar vessel for trial lots, small wineries, and blending components before scaling up.
Material choice starts with SUS304. For higher acid must, long maceration, or aggressive cleaning chemicals, SUS316L is available. Interior welds are ground and passivated; product contact surfaces are pickled or polished to Ra ≤ 0.8 µm where required. Lid, gasket, and clamp ring are matched to the tank diameter to reduce leaks and lid movement during pump-over. If the tank will be sealed, we fit an adjustable pressure relief valve and sanitary vent.
Cooling is optional but often necessary. A dimple jacket on the side wall or bottom plate helps hold must temperature during fermentation. For red wine, we place the jacket to cover the active must volume, not the full shell. That gives useful cooling without wasting chiller capacity. Insulation and outer cladding can be added for cellars with temperature swings.
Open-top tanks are not right for every red. If you need closed pressure fermentation, CO2 collection, or inert gas blanketing, a closed conical tank may suit better. Open-top units work when cap management is manual or semi-automatic and the cellar has headspace for a lid or cover.
Typical Specifications
| Item | Specification |
|---|---|
| Working volume | 500 L |
| Material | SUS304 / SUS316L |
| Top | Open top with removable lid |
| Cooling | Optional side/bottom jacket |
| Finish | Internal polished, external brushed or mirror |
| Fittings | Sample valve, racking arm, CIP spray ball, vent |
| Options | Insulation, stand, casters, custom ports |
FAQ
Can it handle whole clusters? Yes, but confirm opening diameter and must volume. A wider opening helps if you load by hand.
Do I need a cooling jacket? If ambient temperature rises above 68°F or fermentation runs hot, a jacket gives control. Size the chiller for heat load, not just tank volume.
How is cleaning done? A CIP spray ball can be fitted, though open-top tanks are also cleaned manually. We can add a drain and slope the bottom for runoff.
What should I send for a quote? Batch size, grape variety, target fermentation temperature, available space, utility connections, and whether you need a stand or lifting points.
Tell us your batch size, wine type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your winery.
Related products
Wine Fermentation & Storage Tanks 1000L–10000L Stainless Steel for Wineries
Stainless steel wine fermentation and storage tanks from 1,000 L to 10,000 L, built in SUS304 or 316L with dimple-plate cooling jackets, CIP spray balls and conical or flat bottoms. Sized for small cellars through commercial wineries, with pressure rating, jacket area and fittings matched to your batch size, wine style and glycol supply.
2000L Custom Wine Fermenter Tank with Cooling Chiller Vessel
A 2000L wine fermenter tank for small wineries, brewpubs, and contract producers. Built in SUS304 or SUS316L with glycol cooling jackets, sanitary welds, CIP fittings, and customizable cone, manway, and ports. Use it for fermentation, cold stabilization, or storage. Share batch size, wine type, tank count, and space so we can recommend the right cooling area and configuration.
1500L Grape Wine Fermentation Tank with Cooling Jacket | Custom Build
Built for small wineries and trial lots, this 1500 L jacketed fermenter handles roughly 12.8 US barrels per batch. It uses a dimpled cone and lower-cylinder jacket sized for real crash cooling, 304 or 316L stainless construction, and a 60° conical bottom with racking arm. Configured around your glycol loop, CIP setup and floor space before shipping.
100HL Red White Wine Fermentation Tank Dimple Cooling Jacket Commercial Winery
This 100HL red and white wine tank is built for commercial wineries that need reliable fermentation and storage. The dimple cooling jacket controls temperature during active fermentation, while SUS304 or 316L contact surfaces, CIP connections, and insulated cladding support daily cellar work. We size jacket coverage, fittings, and cone details around your batch size, wine type, and glycol supply.
1000L-3000L Stainless Steel Wine Fermentation Tanks for Red & White Wine
Stainless steel wine fermentation and storage tanks from 1,000 L to 3,000 L, built in SUS304 or 316L with dimple cooling jackets, CIP spray balls, racking arms and pressure relief. Sized for small and mid-size wineries fermenting red and white lots, with configurable fittings, insulation and glycol circuits for temperature-controlled cellars.
1000L-3500L White Wine Fermentation Tank with Cooling Jacket for Fruit Wine
Jacketed white wine and fruit wine fermentation tanks in 1000L, 2000L, 3000L and 3500L working volumes. SUS304 or 316L construction, dimple cooling jackets, conical or sloped bottoms, CIP spray ball and tri-clamp glycol connections. Built to order with hydro-tested shells and jackets, safety valves and racking arms for small wineries and commercial cellars.
1000L to 5000L Stainless Fruit Wine Fermenter Grape Wine Fermentation Tank
Stainless fruit wine and grape wine fermenters from 1000L to 5000L, built with 304 or 316L shells, glycol jackets and CIP-ready interiors. We size each tank around your real batch volume, ceiling height and cleaning method, and confirm port layout, pressure rating and finish before production starts.
10000L White Wine Fermenter with Dimple Cooling Jacket 2B Polished
A 10,000 L white wine fermenter built from 3 mm SUS304 with a dimple cooling jacket, 2B polished interior and 80 mm PU insulation. Sized for wineries handling 60 to 100 tonnes per harvest, it covers temperature-controlled fermentation, cold settling and juice holding, with manway, CIP spray ball and racking arm included.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
