Description
What the 1000L–2000L Turnkey Brewery Covers
Most inquiries we get start the same way: a brewer has a lease signed, a floor plan drawn, and needs brewhouse, fermenters, and cold liquor tank that actually talk to each other. This system is built around that reality. Mash/lauter tun, brew kettle/whirlpool, hot and cold liquor tanks, and matching conical fermenters, sized at 1000L, 1500L, or 2000L per batch with the vessel count set by your fermentation calendar, not by a catalog page.
Fabrication Details That Matter Later
Wetted surfaces are SUS304 as standard; SUS316L where you run high-chloride water, sour programs, or aggressive CIP chemistry. Interior welds are ground and passivated, with Ra ≤ 0.4 μm on fermentation tanks so yeast drops clean and CIP returns reach the cone seam. Dimple jackets on the cone and lower cylinder give you 3–5 °C crash cooling without icing the glycol loop. Shell insulation is 80–100 mm polyurethane under a 2B or brushed finish, so the tank does not sweat across a humid summer cellar.
Every tank is hydrotested, and the relief valve is set relative to jacket and inner-tank design pressure — those two numbers get confused often, and a valve sized for the wrong side is a safety issue, not a paperwork issue.
Where These Volumes Fit
A 1000L two-vessel skid suits brewpubs and taproom startups running 2–4 brews a week. 1500L is the common step for regional craft producers adding packaged distribution; 2000L starts to make sense once packaging runs exceed five days a week and you need fewer, larger transfers.
| Parameter | Range |
|---|---|
| Batch volume | 1000 / 1500 / 2000 L |
| Material | SUS304 or SUS316L |
| Inner surface | Ra ≤ 0.4 μm, passivated |
| Inner tank pressure | 0.15–0.3 MPa |
| Jacket pressure | 0.3 MPa design |
| Insulation | PU 80–100 mm |
| Control | PLC with temp and CIP sequencing |
Questions We Get Before PO
Cone or dish bottom? Cone if you crop yeast and dry hop heavily; dish is fine for bright beer tanks. How is CIP handled? Dedicated CIP supply and return arms with rotating spray ball, sized off tank diameter and pump head. Glycol lines? We ship a manifold drawing — mismatched pipe diameter is the most common installation delay.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend tank volume, cooling area and configuration for your brewery.
Related products
8BBL Stainless Steel Conical Fermentation Tank for Craft Brewpubs
An 8BBL stainless steel conical fermentation tank built for brewpubs and microbreweries. Dimple jackets on cylinder and cone, SUS304 or 316L construction, 1.5 to 2 bar working pressure and full tri-clamp fittings for CIP, racking and glycol. Includes sizing guidance and specification details for buyers comparing tank configurations.
Stainless Steel Jacketed Beer Fermentation Tank 200L to 10000L
Jacketed stainless steel beer fermentation tanks from 200 L to 10,000 L, built with SUS304 or 316L shells, 60° or 70° cones, and dimple cooling jackets. Configured for craft breweries and production cellars with CIP spray balls, dry hop ports, racking arms, and pressure-rated fittings. Tell us your batch size and we will size the tank, jacket area, and connections.
1000L Jacketed Isobaric Beer Unitank Stainless Steel for Sale
A 1000 L jacketed isobaric unitank for breweries running 8–10 hl batches. Built in SUS304 or 316L with dimple glycol jackets, 60° cone, CIP spray ball, racking arm, sample valve, and pressure relief valve. Supports fermentation, conditioning, and carbonation in one vessel. Available with custom fittings, dry hop ports, carb stones, and insulation options for craft breweries and contract packers.
1000L 10BBL Conical Beer Fermentation Tank | Stainless Steel Brewery
1000L conical fermentation tanks rated at 10BBL or 10HL, fabricated in SUS304 or 316L stainless steel with dimpled cooling jackets, 60-degree cone bottoms, and CIP spray balls. Available with glycol cooling, pressure-rated lids, and adjustable legs. Tell us your batch size, beer style, tank count, and floor space to get a configured recommendation and quote.
1000 Liter Banana Beer Fermenter Fermentation Tank Container
A 1000 liter banana beer fermenter built for high-solids fruit fermentation, with 60-degree cone, dimpled cooling jacket, SUS304 or 316L wetted parts, CIP spray ball, and sanitary tri-clamp ports. Designed for pilot to mid-size breweries, it supports temperature control, pulp handling, and easy cleaning. Customize pressure, insulation, and port layout for your brewhouse.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
