Description
700L two-vessel brewhouse for small craft production
We build this 700L two-vessel system around a straightforward production rhythm: mash and lauter in one vessel, boil and whirlpool in the other. Electric steam heating suits sites without a boiler, and semi-automatic control keeps the operator involved in step changes instead of hiding the process behind a screen. Typical users run 5–10 brews per week, test seasonal recipes, or need a pilot line that mirrors larger equipment.
Material choices matter after the first year, not the first week. The 304 stainless vessels are formed, welded, and passivated to handle normal brewery cleaning. We inspect weld penetration, grind visible seams, and set gaskets for the cleaning regime the customer uses. Where a customer plans high-chloride cleaning or aggressive sour production, we discuss 316L on wetted parts before fabrication.
Practical configuration notes
- Confirm batch volume, kettle fill level, and headspace before fixing vessel height.
- Check steam power, water supply, drainage, and floor loading at the install point.
- Agree CIP routing, valve positions, and sample points during drawing review.
- Set pressure relief and safety valve values against the vessel design, not the pump rating.
| Parameter | Configuration |
|---|---|
| Nominal capacity | 700 L |
| Material | 304 stainless steel |
| Vessel count | Two vessel |
| Heating | Electric steam |
| Control | Semi automatic |
| Application | Craft beer brewhouse |
FAQ
What batch size can it handle? Plan around 700 L nominal, then verify headspace and boil-off with your recipes. Can we add automation later? Yes, if I/O and valve wiring are reserved at build stage. How is CIP handled? We map spray balls, pump return, and drain paths during drawing approval. Why use 304? It covers common brewery service; 316L is considered for specific corrosion risks.
Send your brew length, beer styles, steam capacity, and room layout before quotation. Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10BBL Steam 2-Vessel Mashing Brewhouse SUS304 Craft Brewery
This 10 BBL two-vessel brewhouse pairs a mash/lauter tun with a steam-heated kettle/whirlpool in SUS304 stainless steel. We cover jacket pressure testing, sanitary welding, tri-clamp piping, CIP access and control options for craft breweries, brewpubs and contract producers. Share batch size, beer styles, steam supply and floor plan so we can configure.
10BBL Brewhouse System | Mash Tun, Lauter Tun, Kettle & Whirlpool
A four-vessel 10BBL brewhouse built for breweries running multiple turns per day. SUS304 or 316L construction, TIG-welded and pickled contact surfaces, steam, electric or direct-fire heating, and PLC control options. Specifications, fabrication details and the information our engineers need before quoting.
10BBL 2-Vessel Stainless Brewhouse for Commercial Craft Breweries
A 10 BBL two-vessel brewhouse built for brewpubs and small production breweries running three to five turns a day. SUS304 or 316L shells, dimple jackets, polished wort-contact surfaces and steam, electric or direct-fire heating. Includes batch flexibility, CIP design and the site details our engineers need before quoting a complete system.
1000L Microbrewery Beer Brewing Equipment Integrated Mash System Stainless Steel
This 1000L microbrewery brewhouse combines mash conversion, lautering, boiling and whirlpool in a compact stainless steel package. We build the integrated saccharification system for craft breweries that need repeatable step mashing, stable temperature control and practical CIP access. The page covers material options, jacket and piping details, utility requirements and configuration questions to settle before requesting a quotation.
1000L 1500L Stainless Craft Beer Fermentation Tank for Micro Brewery
A 1000L or 1500L stainless steel fermentation tank for craft breweries and microbreweries. We build conical-bottom tanks with cooling jackets, CIP piping, pressure-rated fittings and optional SUS316L contact surfaces. This page covers construction details, practical configurations, specifications and selection questions for brewers comparing tank volume, cooling area and vessel layout.
1000L–2000L Craft Beer Brewing System | Turnkey Brewery Equipment
Turnkey 1,000–2,000 L craft beer brewing systems built as two- or three-vessel brewhouses with SUS304 vessels, optional 316L contact surfaces, dimple glycol jackets and 360° CIP. We size kettles, heat exchangers and fermenters around your batch volume, brew frequency and floor space, then match utilities and controls to the building.
10000L Brewhouse System Mash Lauter Whirlpool Kettle Boiling Tank
A 10000 L brewhouse with mash/lauter tun, brew kettle, whirlpool and hot liquor tank, fabricated in AISI 304 or 316L with steam heating, 0.3 MPa working jackets and CIP-ready fittings. Sized for breweries running multiple turns per day that need consistent wort clarity and predictable heat-up rates.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
