Description
This 7BBL conical fermenter was built for small-batch production where floor space and temperature stability both matter. The dimple jacket is not a cosmetic feature—it increases cooling surface area without adding a separate external shell, which keeps the tank footprint tighter than a coil-cooled unit of the same volume.
We fabricate the body and cone from 304 stainless steel as standard. For breweries handling highly acidic sours or aggressive CIP chemicals, 316L on the product-contact cone is available. Interior welds are ground flush and passivated; the exterior is either brushed or mirror-polished depending on your washdown routine. The cone is 60 degrees for yeast settling, with a 2-inch bottom outlet and a racking arm positioned above the yeast bed.
Glycol flows through the dimple jacket at 28–30°F. The jacket covers the cone and lower cylinder, which is where most of the heat load sits during active fermentation. A 1.5-inch tri-clamp inlet and outlet keep the chiller loop simple. Working pressure is 15 psi, with a 30 psi pressure relief valve on the top manway. That combination protects the tank during closed transfers and carbonation without over-specifying the wall thickness.
CIP is handled through a rotating spray ball in the manway. If you plan to harvest yeast, specify the lower cone jacket and a separate yeast outlet. Breweries running 3–5 brews per week often pair one 7BBL tank with a 7BBL bright tank; larger operations may use it as a pilot or barrel-aging vessel instead.
Used tanks vary widely in jacket condition, weld quality, and valve configuration. We inspect and pressure-test before shipping, and we can re-flange ports for your existing glycol loop. Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L SUS304 Pressure Fermenter Tank with CIP for Craft Beer Brewery
A 1000L SUS304 pressure fermenter for craft breweries that want closed transfers, in-tank carbonation and dependable CIP. 3mm shell, Ra ≤0.4 µm interior, dimple-plate glycol jackets and 2 bar working pressure, with 60° cone as standard. Cone angle, 316L construction and connection layout are configured around your batch size and packaging line.
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L Conical SUS304 Fermenter with Spunding Valve for Craft Brewery Beer
A 1000 L conical fermenter in SUS304 with a 60° cone, dimple cooling jackets, 0.2 MPa working pressure, and a spunding valve for natural carbonation. Built for brewpubs casting 10 hl brews, with DIN or Tri-Clamp ports, CIP spray ball, racking arm, and yeast harvest outlet. Custom glycol and thread configurations available.
1000L Stainless Steel 304 Conical Fermenter With Glycol Jacket for Brewery
A 1000L SUS304 conical fermenter with a glycol jacket, built for brewpubs and small commercial breweries. Two cooling zones, 60° cone, 0.2 MPa working pressure, and CIP-ready tri-clamp fittings. Includes fabrication notes, a full specification table, and answers on tank sizing, stainless grade selection, and port configuration.
1000L SS304 Conical Beer Fermenter with Cooling Jacket, CIP & Sanitary Valves
A 1000L SS304 conical fermenter built for taprooms and small breweries, with glycol cooling jackets, sanitary tri-clamp fittings, and a CIP spray ball. We cover shell thickness, 304 versus 316L selection, working pressure and relief valve sizing, cone angle, and how to match tank count and cooling zones to your brewing schedule.
1000L/1500L Stainless Steel Beer Fermenter with Cooling Jacket
Built in 1000 L and 1500 L working volumes with dimple-plate cooling jackets on the cone and lower cylinder, these stainless fermenters hold 0.3 MPa design pressure for pressurized fermentation and carbonation. SUS304 is standard, 316L optional, with interior welds polished to Ra 0.4 µm. Each unit ships with a racking arm, CIP spray ball, sample valve and glycol connections.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
