Description
10000L / 100HL Dry White Wine Fermenting Vessel
A 100HL tank sits in an awkward spot. It is too big for a pilot brewhouse and too small to ignore temperature drift. We build this vessel for wineries and beverage plants running white wine, cider, or cold-fermented beer where a 10,000 L batch needs to hold 8–16 °C without burning glycol all night.
Shell, cone, and jacket
Body and cone come in SUS304 with a 2B finish as standard. Juice with higher chloride or acid load usually points to 316L. Shell runs 3 mm, cone 4 mm, and the dimple jacket is spot-welded in a staggered pattern, then hydro-tested at 1.5× working pressure before it leaves the shop. Insulation is 80–100 mm polyurethane under a stainless cladding — on a 100HL tank, that layer decides whether your chiller cycles or runs flat out in summer.
Interior welds are ground and pickled, with a final Ra ≤ 0.8 µm on product contact surfaces. The cone angle, manway position, and racking arm height are set by how you plan to drop lees and pull clear wine, so we ask for your process before we cut plate.
Typical specifications
| Total volume | 10,000 L / 100 HL |
|---|---|
| Working volume | 80–85% |
| Material | SUS304 or SUS316L |
| Inner finish | Ra ≤ 0.8 µm, pickled and passivated |
| Cooling jacket | Dimple plate, 2–3 zones |
| Jacket pressure | 0.2–0.3 MPa working |
| Insulation | 80–100 mm PU, stainless cladding |
| Connections | Tri-clamp, DIN or SMS |
| Cleaning | Rotary spray ball, CIP inlet |
Questions we get before the PO
Can one tank do white and red? Jacket area is sized for the slower white ferment. Red on skins needs more cooling surface and a different cone. Tell us the split up front.
What pressure rating? Fermentation pressure stays low. If you plan sparging or carbonation in-tank, say so — the shell, relief valve, and manway clamp all change.
Do you supply the chiller and piping? We can, but most clients already have a glycol loop. Send the supply temperature and flow rate and we will match the jacket.
Small craft producers often buy one oversized tank and regret it; commercial plants usually buy in banks of four to six with a shared CIP skid. Both work, but the valve layout differs.
Tell us your batch size, wine type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your winery.
Related products
Wine Fermentation & Storage Tanks 1000L–10000L Stainless Steel for Wineries
Stainless steel wine fermentation and storage tanks from 1,000 L to 10,000 L, built in SUS304 or 316L with dimple-plate cooling jackets, CIP spray balls and conical or flat bottoms. Sized for small cellars through commercial wineries, with pressure rating, jacket area and fittings matched to your batch size, wine style and glycol supply.
2000L-10000L Wine Fermentation & Juice Storage Tank | SUS304/316L
Wine fermentation and fruit juice storage tanks from 2,000 L to 10,000 L, built in SUS304 or 316L with dimple-plate cooling jackets, 60° conical bottoms and CIP spray balls. Includes dimensions, pressure ratings, fitting options and guidance on matching tank volume, cooling area and cone design to your batch and process.
10HL-10KL Commercial Red Wine Fermentation Tank with Half-Pipe Cooling Jacket
Half-pipe coil jacketed red wine fermenters from 10 HL to 10 KL, built in AISI 304 or 316L with Ra 0.8 µm interior finish, 80–100 mm insulation and a 0.3 MPa jacket tested at 0.6 MPa. Configured for cold soak, maceration and pomace removal, with must hatch, racking port, sample valve, CIP spray ball and thermowell.
100HL Red White Wine Fermentation Tank Dimple Cooling Jacket Commercial Winery
This 100HL red and white wine tank is built for commercial wineries that need reliable fermentation and storage. The dimple cooling jacket controls temperature during active fermentation, while SUS304 or 316L contact surfaces, CIP connections, and insulated cladding support daily cellar work. We size jacket coverage, fittings, and cone details around your batch size, wine type, and glycol supply.
1000L-3000L Stainless Steel Wine Fermentation Tanks for Red & White Wine
Stainless steel wine fermentation and storage tanks from 1,000 L to 3,000 L, built in SUS304 or 316L with dimple cooling jackets, CIP spray balls, racking arms and pressure relief. Sized for small and mid-size wineries fermenting red and white lots, with configurable fittings, insulation and glycol circuits for temperature-controlled cellars.
1000L-3000L Open Top Wine Fermentation Tank | Spiral Channel Cooling Jacket
Open top wine fermentation tanks in 1000 L, 2000 L and 3000 L working volumes, built from 304 or 316L stainless steel with a laser-welded spiral channel cooling jacket. Designed for punch-down access, sloped bottom drainage and glycol temperature control in small wineries, custom crush facilities and pilot plants.
1000L-3500L White Wine Fermentation Tank with Cooling Jacket for Fruit Wine
Jacketed white wine and fruit wine fermentation tanks in 1000L, 2000L, 3000L and 3500L working volumes. SUS304 or 316L construction, dimple cooling jackets, conical or sloped bottoms, CIP spray ball and tri-clamp glycol connections. Built to order with hydro-tested shells and jackets, safety valves and racking arms for small wineries and commercial cellars.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
