Description
100 L Nano Brewery System for Pilot and Craft Production
This 100 liter brewhouse is sized for recipe trials, taproom production, and small-batch contract work where repeatability matters more than headline output. We build it as a compact brewhouse with a single-vessel or two-vessel layout depending on your brew length, heating method, and available floor space. If you are moving from home brewing to licensed production, the first limitation is usually not the kettle size. It is temperature control, cleaning access, and how easily the system fits into a real drain-and-utility layout.
We fabricate wetted parts in 304 or 316L stainless. For beer, 304 covers most brewhouse and fermenter duty; 316L is specified when chloride exposure, aggressive cleaning cycles, or product sensitivity justifies the extra cost. Welds are ground and pickled where product contact demands it, with internal surfaces finished to a smooth, cleanable condition. Gaskets, clamp fittings, and valve seats are selected for steam, CIP chemicals, and repeated temperature swings. Sanitary design is not a surface finish alone. It is drainability, weld quality, and access.
Typical applications include craft brewery pilot batches, brewpub recipe development, nano brewery startups, and beverage trials. A 100 L system can support 100 L brews and practical fermentation batches, but vessel working volume, trub loss, and headspace must be confirmed before specifying tanks. Cooling jackets, temperature sensors, pressure relief, and CIP connections should be planned as a system, not added later. For conical fermenters, cone angle and outlet size affect yeast harvesting and cleaning. For brewhouse vessels, heating ramp, whirlpool behavior, and pump sizing affect day-to-day usability.
| Parameter | Typical specification |
|---|---|
| Batch size | 100 L nominal, confirm working volume |
| Material | SUS304 or SUS316L wetted parts |
| Heating | Electric, steam, or direct fire by configuration |
| Cooling | Jacketed fermenter or wort chiller |
| Pressure | Atmospheric or pressure-rated by tank duty |
| Connections | Tri-clamp, CIP, racking, relief valve |
FAQ
Can it run as a home brewery and pilot plant? Yes, if utilities, cleaning, and tank configuration suit licensed production.
Do I need conical fermenters? They help with yeast collection and repeatable transfers; flat-bottom tanks can work for some ale programs.
How is CIP handled? We plan spray ball access, drain slope, pump routing, and chemical compatibility with your fittings.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10BBL SUS304 Two Vessel Brewhouse Commercial Craft Brewing System
This 10 BBL two-vessel brewhouse pairs a mash/lauter tun with a kettle/whirlpool in SUS304. It covers practical details brewers ask about: false bottom design, steam jacket pressure, welding and passivation, CIP routing, and footprint. Use it to compare batch size, vessel configuration, utility demand, and expansion space before requesting a quotation.
10BBL Steam 2-Vessel Mashing Brewhouse SUS304 Craft Brewery
This 10 BBL two-vessel brewhouse pairs a mash/lauter tun with a steam-heated kettle/whirlpool in SUS304 stainless steel. We cover jacket pressure testing, sanitary welding, tri-clamp piping, CIP access and control options for craft breweries, brewpubs and contract producers. Share batch size, beer styles, steam supply and floor plan so we can configure.
10BBL Brewhouse System | Mash Tun, Lauter Tun, Kettle & Whirlpool
A four-vessel 10BBL brewhouse built for breweries running multiple turns per day. SUS304 or 316L construction, TIG-welded and pickled contact surfaces, steam, electric or direct-fire heating, and PLC control options. Specifications, fabrication details and the information our engineers need before quoting.
10BBL 15BBL Commercial Beer Brewing Equipment Brewhouse and Fermenters
A 10–15 BBL commercial brewery system built for real cellar work: SUS304 or 316L vessels, zoned dimple jackets, 15–30 psi fermenters and tri-clamp piping. This page covers fabrication tolerances, cooling area sizing, CIP requirements and the specifications buyers should confirm before requesting a quotation.
1000L 10 hl Steam-Heated 2-Vessel Stainless Mash Tun & Brew Kettle
This 1000L two-vessel brewhouse combines a steam-heated mash tun and brew kettle in a compact 10 hl stainless platform. It suits craft breweries needing repeatable mashing, wort boiling, and CIP-friendly operation. Configure false bottom, sparge, steam jacket, valves, and controls around your batch schedule, utility supply, and floor plan.
1000L-2000L Turnkey Brewery System | Stainless Steel Beer Brewing Equipment
A 1000L to 2000L turnkey brewery package covering brewhouse, hot and cold liquor tanks, and conical fermenters. Built in SUS304 or 316L with dimple cooling jackets, passivated welds, CIP spray balls, and PLC control. Sized against your batch volume, beer styles, and fermentation schedule rather than a fixed catalog configuration.
10000L Stainless Steel Craft Brewery Beer Brewing System
A 10,000L stainless steel brewhouse and fermentation system for production-scale craft breweries. Built in SUS304 or 316L with dimple glycol jackets, CIP spray balls, and Ra ≤0.8µm interior finish. Specifications, pressure ratings, material guidance, and the details our engineers ask for before quoting a complete brewery.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
