Description
Built around batch size and cellar workflow
This 1500L/2500L/3500L turnkey brewery is configured for producers moving from pilot batches to repeatable commercial output. A typical package includes a two- or three-vessel brewhouse, hot liquor and cold liquor tanks, conical fermenters, bright beer tanks, glycol chiller, CIP skid, and sanitary transfer piping. We size tank jackets and brewhouse heating surfaces against your brew length, evaporation rate, and knockout schedule, not a catalog footprint.
Materials, welds, and cleaning
Product-contact parts normally use SUS304; SUS316L is available for aggressive cleaning regimes or chloride concerns. Vessel shells are TIG welded, internally ground and polished to Ra ≤0.6 μm where required, then pickled and passivated. We pressure-test jackets and inner tanks, fit pressure/vacuum relief, and use food-grade EPDM or silicone gaskets. CIP coverage depends on spray-ball position, pump flow, and return-line slope. During fabrication we check those details because poor drainage creates cleaning dead legs that no sanitizer cycle will fix.
Applications and selection details
Brewpubs often choose 1500L batches with stacked or skid-mounted vessels to fit low ceilings. Regional breweries using 2500L or 3500L batches usually need more fermenter cone volume, larger glycol capacity, and room for yeast harvesting. Distilleries and beverage plants can use similar tanks for wash or finished-beverage handling with changed fittings. A conical bottom helps with yeast cropping and dry hopping; flat-bottom or dish-bottom tanks may suit bright beer and serving duties.
Typical configuration
| Item | Range/Options |
|---|---|
| Batch volume | 1500 L, 2500 L, 3500 L |
| Material | SUS304 / SUS316L |
| Brewhouse | 2-vessel or 3-vessel, steam or electric |
| Cellar tanks | Conical fermenter, bright beer tank, unitank |
| Cooling | Dimple or coil jacket, glycol chiller |
| Clean-in-place | CIP spray ball, pump, valves, sanitary piping |
| Control | Manual, PLC/HMI, temperature and pressure logging |
FAQ
What pressure should tanks be rated for? Fermenter working pressure is set by process and safety requirements; relief valve settings and jacket ratings must match the vessel design and local code.
Can the layout be customized? Yes. We adjust tank diameter, height, leg clearance, port positions, and utility connections to fit existing buildings and future expansion.
What information is needed for a quote? Batch size, beer styles, tank count, ceiling height, available utilities, voltage, and automation level.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
10HL/15HL Commercial Brewhouse System | Beer Brewing Equipment
A 10 HL and 15 HL commercial brewhouse system for breweries that need repeatable wort production, sanitary stainless fabrication, and practical utility planning. We match vessel size, heating method, cooling area, and port layout to batch size, beer styles, brews per week, and available floor space. Includes specification guidance and procurement notes.
1000L 10 hl Steam-Heated 2-Vessel Stainless Mash Tun & Brew Kettle
This 1000L two-vessel brewhouse combines a steam-heated mash tun and brew kettle in a compact 10 hl stainless platform. It suits craft breweries needing repeatable mashing, wort boiling, and CIP-friendly operation. Configure false bottom, sparge, steam jacket, valves, and controls around your batch schedule, utility supply, and floor plan.
1000L 1500L Stainless Craft Beer Fermentation Tank for Micro Brewery
A 1000L or 1500L stainless steel fermentation tank for craft breweries and microbreweries. We build conical-bottom tanks with cooling jackets, CIP piping, pressure-rated fittings and optional SUS316L contact surfaces. This page covers construction details, practical configurations, specifications and selection questions for brewers comparing tank volume, cooling area and vessel layout.
1000L-2000L Turnkey Brewery System | Stainless Steel Beer Brewing Equipment
A 1000L to 2000L turnkey brewery package covering brewhouse, hot and cold liquor tanks, and conical fermenters. Built in SUS304 or 316L with dimple cooling jackets, passivated welds, CIP spray balls, and PLC control. Sized against your batch volume, beer styles, and fermentation schedule rather than a fixed catalog configuration.
1000L–2000L Craft Beer Brewing System | Turnkey Brewery Equipment
Turnkey 1,000–2,000 L craft beer brewing systems built as two- or three-vessel brewhouses with SUS304 vessels, optional 316L contact surfaces, dimple glycol jackets and 360° CIP. We size kettles, heat exchangers and fermenters around your batch volume, brew frequency and floor space, then match utilities and controls to the building.
10000L Brewhouse System Mash Lauter Whirlpool Kettle Boiling Tank
A 10000 L brewhouse with mash/lauter tun, brew kettle, whirlpool and hot liquor tank, fabricated in AISI 304 or 316L with steam heating, 0.3 MPa working jackets and CIP-ready fittings. Sized for breweries running multiple turns per day that need consistent wort clarity and predictable heat-up rates.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
