Description
700 L brewhouse and fermentation package
This 700 L commercial system suits brewpubs, restaurant breweries, and small production plants making light lager, ale, and pilot batches. A used package can be a practical route when vessel condition is documented and the control package still matches your utilities. We review shell thickness, jacket integrity, weld quality, pump seals, valve seats, and controller availability before quoting.
Fabrication and material points
Product-contact vessels are typically SUS304; use 316L where chloride exposure, aggressive cleaning, or product risk justifies the cost. Look for full-penetration welds on product surfaces, proper purge on sanitary lines, and polishing that supports draining rather than only appearance. Clamp gaskets, butterfly valve seats, and pump seals should be rated for caustic and acid CIP cycles. Jackets need pressure testing, and insulation must stay dry to prevent corrosion under the cladding.
Temperature control matters most during fermentation. A 700 L conical fermenter needs enough cooling jacket area and glycol flow to hold 50–54°F for ale or 48–50°F for lager, depending on yeast and process. CIP should reach the cone, dish, racking arm, and sample valve. Confirm tri-clamp connections, CIP spray ball access, and independent pressure relief sizing.
| Parameter | Typical specification |
|---|---|
| Batch size | 700 L |
| Material | SUS304 or 316L product contact |
| Vessel type | Brewhouse, fermenter, or cellar tank as configured |
| Cooling | Dimple jacket, glycol service |
| Connections | Tri-clamp, CIP, racking arm, sample valve |
| Pressure | Per vessel rating; relief valve sized to service |
| Finish | Sanitary weld and polished product contact |
Practical selection notes
Small brewpubs often run one brewhouse with several fermenters; commercial plants need matched kettle, whirlpool, and cellar capacity. Do not size a used 700 L system only by tank volume. Check available ceiling height, floor drains, steam or electric power, glycol chiller capacity, and future tank count.
FAQ: Can a used system be reconfigured? Yes, if vessel drawings, jacket test records, and control diagrams are available. What spare parts should be requested? Valve seats, gaskets, pump seals, relief valves, and sensor fittings. How do we verify cleanliness? Request CIP routing, spray-ball coverage, and passivation records.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Related products
500L/1000L Microbrewery Craft Beer Brewing System with Fermentation Unit for Pub
This microbrewery system combines a 500L (5BBL) or 1000L (10BBL) brewhouse with a matching fermentation unit. Built from SUS304 stainless steel with dimple cooling jackets and 60° cone bottom, it suits pubs and restaurants that want consistent house beers. Includes CIP spray ball, safety valve, and piping schematic.
500L Turnkey Steam-Heated 2-Vessel Brewhouse Stainless Tanks Microbrewery
Turnkey 500L steam-heated two-vessel brewhouse with SUS304 vessels, optional 316L wort contact, CIP connections and sanitary fittings. Built for microbreweries that need repeatable 500L batches, documented welds and practical steam, drain and cellar planning before quotation. Stainless beer tanks and skid layout can be configured to batch size and available space.
1000L–2000L Craft Beer Brewing System | Turnkey Brewery Equipment
Turnkey 1,000–2,000 L craft beer brewing systems built as two- or three-vessel brewhouses with SUS304 vessels, optional 316L contact surfaces, dimple glycol jackets and 360° CIP. We size kettles, heat exchangers and fermenters around your batch volume, brew frequency and floor space, then match utilities and controls to the building.
Conical Beer Fermenter 30L-1000L Jacketed Microbrewery Fermentation Tank
Jacketed conical fermenters from 30 L to 1000 L for microbreweries and production plants. Built in SUS304 or 316L with 60-degree cones, dimple cooling jackets, rotating CIP spray balls and pressure-rated options. This page covers material selection, jacket sizing, working pressure and how to match tank volume to your actual batch size.
1000L Red Copper Microbrewery Fermentation Tank | Beer Equipment
1000L red copper microbrewery fermentation tank with SUS304 interior, dimpled glycol jacket, and 0.2 MPa working pressure. Built for craft breweries needing precise temperature control and yeast recovery. Copper exterior, 60-degree cone, CIP spray ball, and customizable ports. Ideal for ales, lagers, and taproom-visible brewhouses.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
