Description
A 6BBL conical fermenter is typically the next step after pilot batches outgrow a 2–3BBL system. At this size, the tank has to do more than hold wort. It becomes the point where temperature control, yeast harvesting, and cleaning routine either support consistency or create bottlenecks. We build these vessels for breweries that need repeatable fermentation without jumping to full-scale production tanks.
The tank body and cone are formed from SUS304 stainless steel, with 316L available for breweries dealing with high-chloride water or aggressive cleaning chemicals. We TIG weld all product-contact seams and fully penetrate them, then pickle and passivate the heat-affected zones. Interior surfaces are polished to under 0.8µm Ra; exterior welds are ground flush for sanitary appearance. The 60-degree cone gives yeast a reliable slide path during dumping, and the 1.5in or 2in tri-clamp bottom outlet is positioned to minimize dead space.
Cooling is handled by dimpled or pillow-plate jackets on the cone and lower cylinder. For a 6BBL tank, we usually specify two independent jacket zones so the cone can be cooled separately during crash cooling. Glycol enters through 1in NPT or tri-clamp connections. A 1.5in dry-hop port, 2in CIP spray ball, and 1.5in racking arm are standard. The top manway is 18in with a clamp lid and pressure relief valve set to the working pressure you specify, typically 15–30psi.
These fermenters suit brewpubs, taprooms, and small production breweries running ales and lagers. They are not intended for high-pressure packaging without additional certification. If you plan to carbonate in-tank, the relief valve and vessel thickness must be matched to that duty.
Technical Specifications
| Capacity | 6BBL (approx. 186 US gallons) |
|---|---|
| Material | SUS304 (316L optional) |
| Interior Finish | <0.8µm Ra |
| Cone Angle | 60 degrees |
| Cooling | Dimpled jacket, 2 zones |
| Working Pressure | 15–30psi (configurable) |
| Ports | Top manway, CIP, dry hop, racking arm, bottom outlet |
FAQ
How do I choose between a 6BBL and a 7BBL? Match the tank to your batch size after trub loss. A 6BBL fermenter typically holds 6BBL of finished beer when filled to 85% capacity.
Can I use this tank for lagering? Yes, provided the jacket is sized for the longer cooling cycle and the glycol supply is adequate.
What information do you need for a quote? Batch size, beer type, number of tanks, available ceiling height, and whether you plan to carbonate in-tank.
Tell us your batch size, beer type, number of fermentation tanks and available space. We can recommend the tank volume, cooling area and configuration for your brewery.
Structure of a Beer Fermentation Tank
Related products
1000L Isobaric Beer Fermenter Regulated Brewery Fermentation Chamber
A 1000 L isobaric beer fermenter gives breweries pressure-capable fermentation, maturation, and carbonation in one vessel. This regulated chamber design uses SUS304 or SUS316L, glycol cooling jackets, 60° or 70° cones, and CIP-ready ports. We build each tank to your batch size, beer style, pressure target, and cellar layout.
1000L SS304 Conical Fermenter Dimple Jacket Mirror Polished Craft Brewery Tank
This 1000L SS304 conical fermenter uses a dimple jacket for efficient glycol cooling and a 60° cone for yeast cropping. Mirror-polished internals, TIG welds, CIP spray ball, and pressure-rated fittings suit craft breweries and brewpubs. Choose 304 for standard beers or 316L for acidic products. Confirm batch size, headspace, glycol supply, and pressure needs before ordering.
1000L Conical Beer Fermenter with Glycol Jacket & SUS304 Tank for Microbrewery
A 1000L conical fermenter built in SUS304 or 316L with two-zone glycol jackets, 60° cone and 1.5 bar working pressure. Suited to taproom breweries and brewpubs moving past 5–7 BBL batches. Standard tri-clamp fittings for racking, dry hopping and CIP, with customizable control, insulation and pressure options for microbrewery use.
1000L Stainless Steel Beer Brewery System with Fermentation Tank
A 1000L stainless steel brewery system built around SUS304 or SUS316L fermentation tanks with dimple-plate cooling jackets, 60–90 degree cones and Ra 0.6 micron interior polish. Working volume lands near 800–850L per batch, with tri-clamp connections for CIP, glycol and beer lines. Jacket zoning, pressure ratings and tank counts are matched to your production schedule.
1000L Conical SUS304 Fermenter with Spunding Valve for Craft Brewery Beer
A 1000 L conical fermenter in SUS304 with a 60° cone, dimple cooling jackets, 0.2 MPa working pressure, and a spunding valve for natural carbonation. Built for brewpubs casting 10 hl brews, with DIN or Tri-Clamp ports, CIP spray ball, racking arm, and yeast harvest outlet. Custom glycol and thread configurations available.
Conical Beer Fermenter Tank 1000L 1500L 2000L 3000L with Cooling Jacket
Jacketed conical fermenters from 1000L to 3000L, built in SUS304 or 316L with dimple cooling jackets on the cone and lower cylinder. Rated to 2 bar working pressure for unitank carbonation. Includes CIP spray ball, racking arm, dry-hop port and sample valve. Sized for brewpubs through regional breweries.
10000L Conical Beer Fermentation Tank | 100HL Stainless Steel Fermenter
A 10,000 L conical fermenter suits 100 hl brewing schedules, double-batch 50 hl brewhouses, and commercial lager or ale production. Built in SUS304 or SUS316L with dimple glycol jackets, 0.2–0.3 MPa working pressure, CIP spray ball, and optional dry hopping or carbonation ports. Configured to your batch size, available height, and cooling capacity.
Although there were a few minor issues, thanks to Polly’s help, it looks brilliant and has brought my little distillery quite a few new customers.
Very good！！I see now in my texting to you that in my excitement over having the installation here in the USA I totally forgot to give you and the company of ACE a very big compliment on the quality of the whole Installation!! It all looks fabulous and the way you packed it in the container was extraordinary!! I am very impressed with your company and want to say a big thank you to everybody who worked on my order!!
We have been using this still for a few batches now making whiskey, gin and a few other spirits and we are very happy with the results so far. The gear works well and gives good control during distillation. The spirit comes out clean and consistent from batch to batch and we have gotten the flavor profile we were looking for. It has also been easy to operate and maintain. It has been a great addition to our distillery and I’d definitely recommend it to other craft distillers looking for reliable equipment.”
Polly is the man! I highly recommend him and this products they produce! I’m very satisfied. she communicates very well and the quality of workmanship is excellent! Shipping was exceptional. Thannks Polly and team
It took 60 days from ordering to delivery, and it looks like a work of art. Thank you to Polly for her help.
It was quite a big job to put the distiller together, so I asked a friend to help me, and I managed to get it done in just eight hours. I’m really pleased with it – it looks brilliant.Ryan Murphy
We are so happy with our new copper distillation system from ACE Distillery Equipment. The equipment is of a fine quality, well crafted and beautifully finished.
The whole process from manufacturing, shipping, installation to commissioning was seamless. The ACE team were professional, responsive and very knowledgeable. They helped us complete the installation successfully and gave great technical support.
It still looks amazing in our distillery and does exactly what it says on the tin. We highly recommend ACE to anyone looking for reliable and high quality distillation equipment.
Thank you ACE team for the great work!”
I want to express my 100% satisfaction with Ace . The service was outstanding: quick, professional, and friendly. Polly provided excellent support throughout. The delivered 100 gallon copper pot still distillery equipment product perfectly meets my expectations and stands out fo r its excellent quality. I feel well taken care of and will recommend you without hesitation.
Thank you for the great service.
Best regards,
Oliver Brown
